Home › ENGINE · 1GR-FE › ENGINE CONTROL SYSTEM › FUEL PUMP RELAY

FUEL PUMP RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT FUEL PUMP RELAY


B060778E19
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    3 - 5
    When battery voltage is not applied to terminals 1 and 2
    10 kΩ or higher
    When battery voltage is applied to terminals 1 and 2
    Below 1 Ω

    If the result is not as specified, replace the fuel pump relay.