Home › RESTRAINTS › SEAT BELT › REAR CENTER SEAT OUTER BELT ASSEMBLY (for CrewMax)

REAR CENTER SEAT OUTER BELT ASSEMBLY (for CrewMax) > INSPECTION

for Preparation Click here



1. INSPECT REAR CENTER SEAT OUTER BELT ASSEMBLY


    B081499E10
  1. Check the ELR.

    1. When the inclination of the retractor is 15° or less from its installed position, check that the belt can be pulled from the retractor. When the inclination of the retractor is more than 45° from its installed position, check that the belt locks.
      If the operation is not as specified, replace the rear center seat outer belt assembly.
      Text in Illustration 
      *a
      Unlocked
      *b
      Locked
      *c
      45°

  1. Check the fastening function of the child restraint system.

    NOTICE:
    The check should be performed with the outer belt installed.


    1. When the belt is pulled out fully, the belt should automatically start to retract.

    2. After the belt has fully retracted, the belt should be able to be pulled out and retracted again.
      If the operation is not as specified, replace the rear center seat outer belt assembly.