Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › BLIND SPOT MONITOR SYSTEM

BLIND SPOT MONITOR SYSTEM > TERMINALS OF ECU

for Preparation Click here



BLIND SPOT MONITOR SENSOR RH (MASTER)
C270135E07

Terminal No.
(Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
S6-3 (BIND) - S6-10 (BRGD)
R - W-B
Blind spot monitor main switch indicator signal
Blind spot monitor main switch indicator illuminated
11 to 14 V
Blind spot monitor main switch indicator not illuminated
Below 1 V
S6-4 (OMIR) - S6-10 (BRGD)
L - W-B
Outer rear view mirror indicator power source signal RH
Outer rear view mirror indicator illuminated
2.5 to 7.5 V
Outer rear view mirror indicator not illuminated
Below 1 V
S6-5 (BRB) - S6-10 (BRGD)
Y - W-B
IG power source signal
Ignition switch off
Below 1 V
Ignition switch ON
11 to 14 V
S6-8 (BSSW) - S6-10 (BRGD)
P - W-B
Blind spot monitor main switch assembly (warning canceling switch assembly) signal
Ignition switch ON, blind spot monitor main switch assembly (warning canceling switch assembly) on
11 to 14 V
Ignition switch ON, blind spot monitor main switch assembly (warning canceling switch assembly) off
Below 1 V
S6-10 (BRGD) - Body Ground
W-B - Body ground
Ground
Always
Below 1 V

BLIND SPOT MONITOR SENSOR LH (SLAVE)
C270135E08

Terminal No.
(Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
S5-3 (BUZ) - S5-10 (BLGD)
G - W-B
Rear cross traffic alert buzzer (blind spot monitor buzzer) operation signal
Rear cross traffic alert buzzer (blind spot monitor buzzer) not sounding
11 to 14 V
Outer rear view mirror indicator blinks
Alternating between 0 to 7.5 V
Rear cross traffic alert buzzer (blind spot monitor buzzer) sounding
Alternating between 0 to 14 V
S5-4 (OMIL) - S5-10 (BLGD)
V - W-B
Outer rear view mirror indicator power source signal LH
Outer rear view mirror indicator illuminated
2.5 to 7.5 V
Outer rear view mirror indicator blinks
Alternating between 0 to 7.5 V
Outer rear view mirror indicator not illuminated
Below 1 V
S5-5 (BLB) - S5-10 (BLGD)
BR - W-B
IG power source signal
Ignition switch off
Below 1 V
Ignition switch ON
11 to 14 V
S5-10 (BLGD) - Body Ground
W-B - Body ground
Ground
Always
Below 1 V