Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › BLIND SPOT MONITOR MAIN SWITCH

BLIND SPOT MONITOR MAIN SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL BLIND SPOT MONITOR MAIN SWITCH ASSEMBLY


    B354808
  1. Attach the 2 claws to install the blind spot monitor main switch assembly.



2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH


    B355352
  1. Attach the 4 claws to install the lower instrument panel finish panel sub-assembly RH.

  1. Install the 4 screws <F> and bolt <A>.



3. INSTALL COWL SIDE TRIM BOARD LH
  1. Attach the 2 clips to install the cowl side trim board LH.

  1. Install the nut.



4. INSTALL FRONT DOOR SCUFF PLATE LH
  1. Attach the 6 claws and 3 clips to install the front door scuff plate LH.



5. INSTALL INSTRUMENT SIDE PANEL LH


    B355334
  1. Attach the 4 guides and 3 claws to install the instrument side panel LH.