EXHAUST PIPE > DISASSEMBLY |
| 1. REMOVE MONOLITHIC CONVERTER PROTECTOR (for Bank 1) |
Remove the 4 bolts, 4 nuts, lower monolithic converter protector, upper monolithic converter protector, 2 No. 1 converter protector stays and 2 No. 2 converter protector stays from the front exhaust pipe assembly.
| 2. REMOVE NO. 1 MONOLITHIC CONVERTER PROTECTOR (for Bank 1) |
Remove the 4 bolts, 4 nuts, lower No. 1 monolithic converter protector, upper No. 1 monolithic converter protector, 2 No. 1 converter protector stays and 2 No. 2 converter protector stays from the front exhaust pipe assembly.
| 3. REMOVE MONOLITHIC CONVERTER PROTECTOR (for Bank 2) |
Remove the 4 bolts, 4 nuts, lower monolithic converter protector, upper monolithic converter protector, 2 No. 1 converter protector stays and 2 No. 2 converter protector stays from the front No. 2 exhaust pipe assembly.
| 4. REMOVE NO. 1 MONOLITHIC CONVERTER PROTECTOR (for Bank 2) |
Remove the 4 bolts, 4 nuts, lower No. 1 monolithic converter protector, upper No. 1 monolithic converter protector, 2 No. 1 converter protector stays and 2 No. 2 converter protector stays from the front No. 2 exhaust pipe assembly.