Home › RESTRAINTS › SEAT BELT › CHILD RESTRAINT SEAT ANCHOR BRACKET (for CrewMax RH Side)

CHILD RESTRAINT SEAT ANCHOR BRACKET (for CrewMax RH Side) > REMOVAL

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.



1. REMOVE REAR SEAT ASSEMBLY RH


    B353823
  1. Pull the No. 1 reclining adjuster release handle RH and fold up the seat cushion.



    B353825
  1. Remove the 4 bolts and rear seat assembly RH.

    NOTICE:
    Be careful not to damage the vehicle body.



2. REMOVE REAR SEAT HEADREST ASSEMBLY


    B355160
  1. Push the 2 lock release buttons indicated by the arrows in the illustration to release the lock, and then remove the rear seat headrest assembly.



3. REMOVE TETHER ANCHOR BRACKET SUB-ASSEMBLY


    B355164
  1. Remove the bolt and tether anchor bracket sub-assembly.