Home › Vehicle Exterior › BODY DIMENSIONS › REAR SUSPENSION CROSSMEMBER
BM3700E _01 Vehicle Exterior _095240 BODY DIMENSIONS _0447713 REAR SUSPENSION CROSSMEMBER F

BODY DIMENSIONS  REAR SUSPENSION CROSSMEMBER  DISTANCE FROM CENTER LINE / DATUM PLANE  


HINT:
·

Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Stabilizer Bracket Location Pin Hole φ16 (0.63)
B Rear Suspension Crossmember Installation Hole φ12.5 (0.49)
b Rear Suspension Crossmember Installation Hole 18X12.5
(0.71X0.49)
C, c Rear Suspension Lower Arm Installation Hole 24.2X12.2
(0.95X0.48)
D, d Rear Suspension Upper Arm Installation Hole φ12.2 (0.48)
E, e Rear Suspension Crossmember Installation Hole φ21.2 (0.83)

K160503C02
0.083,8.594 0.396,8.75 0.313,0.156 10 false *a
*a mm
(in.)
- -


K160504C02
1.573,5.125 1.885,5.281 0.313,0.156 10 false *a 1.594,6.427 1.906,6.583 0.313,0.156 10 false *b 0.083,8.594 0.396,8.75 0.313,0.156 10 false *c
*a Imaginary Datum Line *b Height from Imaginary Datum Line
*c mm
(in.)
- -