Home › Vehicle Exterior › BODY PANEL › ROCKER REAR PANEL
BM3700E _01 Vehicle Exterior _094466 BODY PANEL _0448534 ROCKER REAR PANEL F

BODY PANEL  ROCKER REAR PANEL  CUT AND JOIN REPLACEMENT SECTIONS  


K160050

With the quarter panel cut and join replacement sections (small areas) removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108827

Cut and Join Location

a.

Carefully cut the step plate sub-assembly lower so as not to damage A.

K159861C01
3.698,3.958 3.531,3.958 3.531,3.958 3.219,3.729 false 2.823,3.719 3.615,3.427 3.615,3.427 3.781,3.427 false 2.313,2.938 2.625,3.094 0.313,0.156 10 false *a 3.75,3.885 4.063,4.042 0.313,0.156 10 false *1 3.865,3.365 4.021,3.563 0.156,0.198 10 false A
*1 STEP PLATE SUB-ASSEMBLY LOWER - -
*a 40 mm (1.57 in.) - -




INSTALLATION


Symbol Meaning
K108818

Remove Weld Points
K108823

Plug Weld
K108827

Cut and Join Location
K108831

Butt Weld

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)


c.

If the entire supply part is not needed, remove the part of the supply part that is needed.

K159862C01
3.333,2.75 3.167,2.75 3.167,2.75 2.906,2.302 false 3.406,2.688 3.719,2.844 0.313,0.156 10 false *1 1.208,1.073 1.521,1.229 0.313,0.156 10 false *a
*1 STEP PLATE SUB-ASSEMBLY LOWER - -
*a 90 mm (3.54 in.) - -



d.

Weld the step plate sub-assembly lower to the vehicle side.

K159863C01
3.698,3.958 3.531,3.958 3.531,3.958 3.219,3.708 false 3.74,3.896 4.052,4.052 0.313,0.156 10 false *1
*1 STEP PLATE SUB-ASSEMBLY LOWER - -



e.

After welding, apply body sealer to the corresponding parts. (See the painting/coating)


f.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.