Home › Vehicle Exterior › BODY PANEL › BODY LOWER BACK PANEL (for TMC Made) › from 2021.07
BM3700E _01 Vehicle Exterior _094466 BODY PANEL _0485528 BODY LOWER BACK PANEL(for TMC Made) F

BODY PANEL  BODY LOWER BACK PANEL(for TMC Made)  ASSEMBLY REPLACEMENT  


K160058

REMOVAL


Symbol Meaning
K108818

Remove Weld Points

a.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K159722C03
0.104,0.104 0.417,0.302 0.313,0.198 10 false *A
*A for 2WD - -
K108837

Adhesive - -


K159723C01
0.104,0.104 0.417,0.302 0.313,0.198 10 false *A
*A for 2WD - -


K164045C01
0.104,0.104 0.417,0.302 0.313,0.198 10 false *A 0.104,0.313 0.417,0.51 0.313,0.198 10 false *B
*A for 2WD *B LH Side


K164046C01
0.104,0.104 0.417,0.302 0.313,0.198 10 false *A 0.104,0.313 0.417,0.51 0.313,0.198 10 false *B
*A for 2WD *B RH Side



b.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K159729C03
0.104,0.104 0.417,0.302 0.313,0.198 10 false *A
*A for AWD - -
K108837

Adhesive - -


K159730C01
0.104,0.104 0.417,0.302 0.313,0.198 10 false *A
*A for AWD - -


K164049C01
0.104,0.104 0.417,0.302 0.313,0.198 10 false *A 0.104,0.313 0.417,0.51 0.313,0.198 10 false *B
*A for AWD *B LH Side


K164050C01
0.104,0.104 0.417,0.302 0.313,0.198 10 false *A 0.104,0.313 0.417,0.51 0.313,0.198 10 false *B
*A for AWD *B RH Side




INSTALLATION


Symbol Meaning
K108823

Plug Weld

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)


c.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115).

HINT:
·

Do not apply adhesive around the plug welding points.

·

Minimize squeeze out in plug welding areas.



K159722C03
0.104,0.104 0.417,0.302 0.313,0.198 10 false *A
*A for 2WD - -
K108837

Adhesive - -


K159726C03
3.417,1.5 3.583,1.5 3.583,1.5 3.833,1.917 false 3.25,1.427 3.563,1.583 0.313,0.156 10 false *1 0.104,0.104 0.417,0.302 0.313,0.198 10 false *A
*A for 2WD - -
*1 BODY LOWER BACK PANEL SUB-ASSEMBLY - -


K164047C01
5.917,2.917 6.75,3.167 0.833,0.25 6.25,2.917 6.25,2.5 false 0.104,0.104 0.417,0.302 0.313,0.198 10 false *A 6,2.948 6.708,3.167 0.708,0.219 10 false 12 (122, 9) 0.104,0.313 0.417,0.51 0.313,0.198 10 false *B
*A for 2WD *B LH Side
V100146

N*m (kgf*cm, ft.*lbf): Specified torque - -


K164048C01
3.583,2.917 4.417,3.167 0.833,0.25 4.125,2.917 4.125,2.5 false 0.104,0.104 0.417,0.302 0.313,0.198 10 false *A 3.698,2.969 4.448,3.219 0.75,0.25 10 false 12 (122, 9) 0.104,0.313 0.417,0.51 0.313,0.198 10 false *B
*A for 2WD *B RH Side
V100146

N*m (kgf*cm, ft.*lbf): Specified torque - -



d.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115).

HINT:
·

Do not apply adhesive around the plug welding points.

·

Minimize squeeze out in plug welding areas.



K159729C03
0.104,0.104 0.417,0.302 0.313,0.198 10 false *A
*A for AWD - -
K108837

Adhesive - -


K159733C03
3.417,1.5 3.583,1.5 3.583,1.5 3.833,1.917 false 3.25,1.427 3.563,1.583 0.313,0.156 10 false *1 0.104,0.104 0.417,0.302 0.313,0.198 10 false *A
*A for AWD - -
*1 BODY LOWER BACK PANEL SUB-ASSEMBLY - -


K164051C01
5.917,2.917 6.75,3.167 0.833,0.25 6.25,2.917 6.25,2.5 false 0.104,0.104 0.417,0.302 0.313,0.198 10 false *A 6,2.948 6.708,3.167 0.708,0.219 10 false 12 (122, 9) 0.104,0.313 0.417,0.51 0.313,0.198 10 false *B
*A for AWD *B LH Side
V100146

N*m (kgf*cm, ft.*lbf): Specified torque - -


K164052C01
3.583,2.917 4.417,3.167 0.833,0.25 4.125,2.917 4.125,2.5 false 0.104,0.104 0.417,0.302 0.313,0.198 10 false *A 3.698,2.969 4.448,3.219 0.75,0.25 10 false 12 (122, 9) 0.104,0.313 0.417,0.51 0.313,0.198 10 false *B
*A for AWD *B RH Side
V100146

N*m (kgf*cm, ft.*lbf): Specified torque - -



e.

After welding, apply body sealer and undercoating to the corresponding parts. (See the painting /coating)


f.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.