OUTLINE
Front Drive Shaft
A Rzeppa type Constant Velocity Joint (CVJ) is used on the front axle side, and a tripod type CVJ is used on the front differential side.
| *1 | Rzeppa Type CVJ | *2 | Tripod Type CVJ |
| *3 | Front Drive Shaft Assembly LH | *4 | Front Drive Shaft Damper |
| *5 | Front Drive Shaft Assembly RH | - | - |
|
Front Axle Side |
|
Front Differential Side |
| *1 | Rzeppa Type CVJ | *2 | Tripod Type CVJ |
| *3 | Front Drive Shaft Assembly LH | *4 | Front Drive Shaft Damper |
| *5 | Front Drive Shaft Assembly RH | - | - |
|
Front Axle Side |
|
Front Differential Side |
Rear Drive Shaft (AWD Models)
The rear drive shaft assembly of the HV model uses a Rzeppa type constant velocity joint on the axle side and a double offset type constant velocity joint on the differential side.
| *1 | Rzeppa Type CVJ | *2 | Double Offset Type CVJ |
|
Rear Axle Side |
|
Differential Side |