Home › Drivetrain › AXLE AND DIFFERENTIAL › AXLE SYSTEM
NM3700E _52 Drivetrain _094031 AXLE AND DIFFERENTIAL _0443124 AXLE SYSTEM GE GENERAL F

AXLE AND DIFFERENTIAL  AXLE SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

Front Axle

i.

Compact and highly rigid double-row angular ball bearings are used. The double-row angular ball bearings and the axle hub are integrated to ensure high rigidity, thus enhancing excellent driving stability and braking stability.


ii.

Running torque has been reduced via low-friction type grease and seals, contributing to excellent fuel economy.


iii.

The sensor rotor is integrated in the bearing inner race.


iv.

A 12-point front axle shaft nut is used and staked in order to ensure that the front axle hub sub-assembly is properly tightened. Once removed, this nut cannot be reused.

X147994C01
4.094,1.583 5.167,1.01 5.167,1.01 5.333,1.01 true 4.26,2.052 5.156,2.583 5.156,2.583 5.323,2.583 true 3.469,2.302 2.25,2.896 2.25,2.896 2.083,2.896 true 3.594,1.563 2.573,0.688 2.573,0.688 2.406,0.688 true 2.208,0.594 2.521,0.75 0.313,0.156 10 false *1 1.875,2.844 2.188,3 0.313,0.156 10 false *2 5.417,2.5 5.729,2.656 0.313,0.156 10 false *3 5.417,0.938 5.729,1.094 0.313,0.156 10 false *4
*1 Double-row Angular Ball Bearing *2 Sensor Rotor
*3 Front Axle Shaft Nut (12-point) *4 Front Axle Hub Sub-assembly


NOTICE:
·

Do not place magnetized objects close to the surface of the sensor rotor.

·

Do not allow any iron particles, iron sand, dust, debris or oil to come in contact with the surface of the sensor rotor.





b.

Rear Axle

i.

Compact and highly rigid double-row angular ball bearings are used. The double-row angular ball bearings and the axle hub are integrated to ensure high rigidity, thus enhancing excellent driving stability and braking stability.


ii.

Running torque has been reduced via low-friction type grease and seals, contributing to excellent fuel economy.


iii.

A 12-point rear axle shaft nut is used on the AWD models and staked in order to ensure that the rear axle hub and bearing assembly is properly tightened. Once removed, this nut cannot be reused.


iv.

The sensor rotor is integrated in the bearing inner race.

2WD Models
X147995C01
3.917,2.25 4.5,2.667 4.5,2.667 4.667,2.667 true 3.281,1.625 2.781,0.771 2.781,0.771 2.615,0.771 true 3.063,2.083 2.573,2.531 2.573,2.531 2.406,2.531 true 2.417,0.688 2.729,0.844 0.313,0.156 10 false *1 2.188,2.427 2.5,2.583 0.313,0.156 10 false *2 4.667,2.667 4.979,2.823 0.313,0.156 10 false *3
*1 Double-row Angular Ball Bearing *2 Sensor Rotor
*3 Rear Axle Hub and Bearing Assembly - -


AWD Models
X147996C01
4,1.583 4.917,1.25 4.917,1.25 5.083,1.25 true 4.104,2.042 4.854,2.458 4.854,2.458 5.021,2.458 true 3.375,1.573 2.771,0.792 2.771,0.792 2.604,0.792 true 3.25,2.292 2.646,2.906 2.646,2.906 2.479,2.906 true 2.406,0.708 2.719,0.865 0.313,0.156 10 false *1 2.26,2.823 2.573,2.979 0.313,0.156 10 false *2 5.094,2.375 5.406,2.531 0.313,0.156 10 false *3 5.156,1.167 5.469,1.323 0.313,0.156 10 false *4
*1 Double-row Angular Ball Bearing *2 Sensor Rotor
*3 Rear Axle Shaft Nut (12-point) *4 Rear Axle Hub and Bearing Assembly


NOTICE:
·

Do not place magnetized objects close to the surface of the sensor rotor.

·

Do not allow any iron particles, iron sand, dust, debris or oil to come in contact with the surface of the sensor rotor.