CONSTRUCTION
Double-wishbone type suspension (AWD Models)
The rear upper control arm assembly, rear lower control arm assembly and rear No. 1 suspension arm assembly are made of press formed high-tensile strength steel sheet, achieving high rigidity and reduced weight.
The spring constant of the trailing arm bush is optimized to reduce shock generated while driving on an uneven road surface. The trailing arm bush is located on the outer side of the vehicle, with its angles of inclination and rotation optimized to provide excellent steering stability and riding quality.
| *1 | Rear Lower Control Arm Assembly | *2 | Rear Upper Control Arm Assembly |
| *3 | Rear No. 1 Suspension Arm Assembly | - | - |
| *a | Cross Section of Rear Upper Control Arm Assembly Mounting | *b | Cross Section of Rear Lower Control Arm Assembly Mounting |
| *c | Cross Section of Rear No. 1 Suspension Arm Assembly Mounting | *d | Vehicle Body Side |
| *e | Stabilizer Link Assembly Mounting | *f | Axle Side |