Home › Drivetrain › Q510 (HYBRID TRANSMISSION / TRANSAXLE) › REAR DRIVE SYSTEM
NM3700E _52 Drivetrain _094489 Q510 HYBRID TRANSMISSION / TRANSAXLE _0444784 REAR DRIVE SYSTEM DE DETAILS F

Q510 HYBRID TRANSMISSION / TRANSAXLE  REAR DRIVE SYSTEM  DETAILS  MGR  


CONSTRUCTION


a.

MGR uses a compact, lightweight and highly efficient alternating current induction motor.


b.

MGR operates as a power source of the rear wheels by supplying electric power from the HV battery and generated electric power from the MG 1 according to various traveling conditions, thereby improving starting and acceleration performance on low friction roads, as well as improving vehicle stability during small-distance turns.


c.

In order to minimize the impact of AWD on fuel consumption, the MGR adopts an induction motor that does not use magnets. By reducing the size and weight of the motor and by cutting the output to the motor in the 2WD running state, the no-load drag loss is eliminated, contributing to low fuel consumption.


d.

When a 3-phase alternating current is passed through the 3-phase windings of the stator coil, a rotating magnetic field is created in the electric motor. The rotating magnetic field that is generated around the rotor causes an induced electric current to flow within the rotor. This induced current causes a magnetic field to form around the rotor, and that magnetic field interacts with the rotating magnetic field to produce torque. The generated torque is more or less proportional to the intensity of the current flow, and the rotational speed is controlled by the frequency of the AC current source.

X132014E02
3.344,1.521 3.469,1.833 3.469,1.833 3.625,1.833 true 0.604,0.917 1.99,1.417 1.385,0.5 10 false : Stator 0.521,1.885 1.906,2.385 1.385,0.5 10 false : Rotation Torque 4.573,1.479 6.479,1.719 1.906,0.24 10 false 3-phase Alternating Current 3.698,1.781 4.333,2.073 0.635,0.292 10 false Rotor