Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM (for Gasoline Model) › 2020.08–2021.07
NM3700E _57 Power Source / Network _094506 NETWORKING _0444876 CAN COMMUNICATION SYSTEM(for Gasoline Model) CO CONTROL F

NETWORKING  CAN COMMUNICATION SYSTEM(for Gasoline Model)  CONTROL  CAN COMMUNICATION CONTROL  


FUNCTION


CAN Connection Components

*1: Models with blind spot monitor system

*2: Models with parking assist monitor system

*3: Models with parking support brake system

*4: Models with panoramic view monitor system

*5: Models with headup display

*6: Models with DCM (telematics transceiver)

*7: Models with smart entry and start system

*8: Models with power back door system

*9: Models with CAN compatible dealer optional devices

Central Gateway ECU (Network Gateway ECU) Forward Recognition Camera
Millimeter Wave Radar Sensor Assembly Blind Spot Monitor Sensor LH*1
Rear Television Camera Assembly*2 Clearance Warning ECU Assembly*3
Parking Assist ECU*4 Transmission Control ECU
ECM Headup Display (Meter Mirror Sub-assembly)*5
DCM (Telematics Transceiver)*6 Radio and Display Receiver Assembly
Combination Meter Assembly Skid Control ECU (Brake Actuator Assembly)
Airbag Sensor Assembly Steering Sensor
Power Steering ECU Assembly Certification ECU (Smart Key ECU Assembly)*7
Power Back Door ECU (Multiplex Network Door ECU)*8 Air Conditioning Amplifier Assembly
Main Body ECU (Multiplex Network Body ECU) Option Connector (Bus Buffer ECU)*9


DIAGNOSIS


a.

If a malfunction occurs on a CAN communication bus, ECUs that are connected to the CAN communication bus store Diagnostic Trouble Codes (DTCs) in memory.


b.

The 5-digit DTCs can be read by connecting the GTS to the DLC3.


c.

For details, refer to the Repair Manual.