Home › Drivetrain › P910 (HYBRID TRANSMISSION / TRANSAXLE) › SHIFT LOCK SYSTEM
NM3700E _52 Drivetrain _094526 P910 HYBRID TRANSMISSION / TRANSAXLE _0444886 SHIFT LOCK SYSTEM CO CONTROL F

P910 HYBRID TRANSMISSION / TRANSAXLE  SHIFT LOCK SYSTEM  CONTROL  SHIFT LOCK CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function

*1: Models without smart entry and start system

*2: Models with smart entry and start system

Shift Lock Solenoid Assembly Shift Lock Control ECU Controls the shift lock solenoid based on signals from each switch.
Shift Lock Solenoid Locks the shift lever in P.
P Detection Switch Detects when the shift lever is in P.
Shift Lock Release Button Manually overrides the shift lock mechanism.
Stop Light Switch Assembly Detects when the brake pedal is depressed.
Key Interlock Solenoid*1 Disables the key to be pulled out with the shift lever in any position other than P.
Ignition or Starter Switch Assembly*1 Detects the switch operation condition.
Ignition Switch (Push Start Switch)*2 Detects the switch operation condition.
Certification ECU (Smart Key ECU Assembly)*2 Sends the ignition switch (push start switch)*2 signal to the shift lock control ECU.


SYSTEM CONTROL


a.

The shift lock control ECU uses the P detection switch to detect the shift lever position, and receives input signals from the stop light switch assembly and ignition switch. Upon receiving these signals, the shift lock control ECU turns on the key interlock solenoid* and the shift lock solenoid in order to release the key interlock* and shift lock.

*: Models without smart entry and start system



FUNCTION


a.

Shift Lock Mechanism

i.

The shift lock mechanism prevents the shift lever from being moved to any position other than P, unless the ignition switch is ON (IG) or ON (READY), and the shift lever knob button is operated with the brake pedal depressed. This mechanism helps to prevent unintentional acceleration.


ii.

A shift lock release button, which manually overrides the shift lock mechanism, is used.



b.

Key Interlock Mechanism (Models without Smart Entry and Start System)

i.

The key interlock mechanism prevents the key from being pulled out after the ignition switch has been turned off, unless the shift lever has been moved to P. Thus, the driver is required to park the vehicle with the shift lever in P.