Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM › 2020.08–2021.07
NM3700E _59 Vehicle Exterior _094626 LIGHTING (EXT) _0445099 LIGHTING SYSTEM CO CONTROL F

LIGHTING (EXT)  LIGHTING SYSTEM  CONTROL  DAYTIME RUNNING LIGHT  


FUNCTION OF MAIN COMPONENTS


Component Function
Daytime Running Light Assembly LH Receives daytime running light control signals and illuminates the daytime running lights.
Daytime Running Light Assembly RH
Semiconductor Power Integration ECU Supplies power to the daytime running lights.
Main Body ECU (Multiplex Network Body ECU) Receives various signals and transmits the daytime running light control signal.
Automatic Light Control Sensor Detects the ambient light level and transmits a signal to the main body ECU.
Steering Sensor Sends the light control switch position signal to the main body ECU.
Headlight Dimmer Switch Assembly Light Control Switch Sends the light control switch position signal to the steering sensor.


SYSTEM CONTROL


a.

Operating Condition

i.

The daytime running lights illuminate when the following conditions are all met.

·

The ignition switch is ON (IG).

·

The READY signal is input.*1

·

The engine speed signal is input (engine is running).*2

·

The light control switch is in the ○ (off) or AUTO position (and the taillights are not turned on via the automatic light control system).

·

The parking brake is released.

*1: HV models

*2: Gasoline models






FUNCTION


a.

The daytime running light system is designed to automatically illuminate the Light Emitting Diode (LED) lights during the daytime to keep the vehicle highly visible to other vehicles.