FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
|
*1: Models without Stereo Component Amplifier Assembly *2: Models with Stereo Component Amplifier Assembly *3: Models with Digital Audio Broadcast (DAB) Tuner *4: Models without DCM (telematics transceiver) *5: Models with DCM (telematics transceiver) *6: Models with headup display *7: Gasoline models *8: HV models |
|
| Radio and Display Receiver Assembly | ·
Outputs the audio signal of the selected audio source to the speakers*1 or stereo component amplifier assembly*2. ·
Sends each sound source and hands-free system status to the combination meter. ·
Using the equipped 2.4GHz frequency band wireless LAN, communicates via Wi-Fi with a wireless LAN access point, a tethering capable mobile phone or Wi-Fi mobile router. |
| Speakers | Output the audio sounds. |
| Roof Antenna Assembly
·
AM ·
FM |
Receives AM/FM radio broadcasts via the roof antenna assembly. |
| Window Glass Antenna Wire (Rear)*3
·
DAB |
Receives radio broadcasting signals (DAB). |
| Digital Audio Broadcasting Antenna Assembly*3 | Amplifies DAB signals from the DAB antenna and sends them to the radio and display receiver assembly. |
| Steering Pad Switch Assembly | Sends operation signals such as volume adjustment, mode selection and song selections to the radio and display receiver assembly. |
| Telephone Microphone Assembly | ·
Detects voice during hands-free conversations and voice commands. ·
Is installed in the map light assembly and converts sound waves to an electrical signal and sends it to the radio and display receiver assembly*4 or DCM (telematics transceiver)*5. |
| No. 1 Stereo Jack Adapter Assembly | When a USB memory device, portable audio player (USB type) or Apple device is connected, communicates with the radio and display receiver assembly via USB. |
| Combination Meter Assembly | ·
Displays various information and operation signals on the multi-information display sent from the radio and display receiver assembly via local bus communication. ·
Sends the vehicle speed signal to the radio and display receiver assembly and stereo component amplifier assembly*2. |
| Meter Mirror Sub-assembly*6 | Displays various information on the head up display sent from the radio and display receiver assembly via local bus communication. |
| Navigation Antenna Assembly
·
GPS Antenna |
Receives signals from GPS satellites and transmits these signals to the radio and display receiver assembly. |
| Park/Neutral Position Switch Assembly*7 | Sends an R shift position signal to the radio and display receiver assembly. |
| Power Distribution Box Assembly*8 | |
| Hybrid Vehicle Control ECU*8 | Sends an R shift position signal to the power distribution box assembly. |
| Brake Actuator Assembly
·
Skid Control ECU |
Sends the parking brake position signal to the radio and display receiver assembly. |
| Stereo Component Amplifier Assembly*2 | Amplifies audio signals sent from the radio and display receiver assembly and sends them to the speakers. |
| DCM (Telematics Transceiver)*5 | Sends microphone voice signals sent from the telephone microphone assembly to the radio and display receiver assembly. |
DIAGNOSIS
For details on the procedure required to enter the Service Menu screen, refer to the Repair Manual.