Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM (for HV Model) › from 2021.07
NM3700E _57 Power Source / Network _094506 NETWORKING _0444875 CAN COMMUNICATION SYSTEM(for HV Model) CO CONTROL F

NETWORKING  CAN COMMUNICATION SYSTEM(for HV Model)  CONTROL  CAN COMMUNICATION CONTROL  


FUNCTION


CAN Connection Components

*1: Models with blind spot monitor system

*2: Models with parking assist monitor system

*3: Models with parking support brake system

*4: Models with panoramic view monitor system

*5: AWD Model

*6: Models with headup display

*7: Models with DCM (telematics transceiver)

*8: Models with smart entry and start system

*9: Models with power back door system

*10: Models with CAN compatible dealer optional devices

*11: Models with vehicle approaching speaker controller

*12: Models with tire pressure warning system

*13: Models without entry and start system

*14: Models with Toyota Safety Sense

Central Gateway ECU (Network Gateway ECU) Forward Recognition Camera*14
Millimeter Wave Radar Sensor Assembly*14 Blind Spot Monitor Sensor LH*1
Rear Television Camera Assembly*2 Clearance Warning ECU Assembly*3
Parking Assist ECU*4 Battery ECU Assembly
Rear HV Motor Control Inverter ASSY*5 Inverter with Converter Assembly
Hybrid Vehicle Control ECU ECM
Headup Display (Meter Mirror Sub-assembly)*6 DCM (Telematics Transceiver)*7
Radio and Display Receiver Assembly Combination Meter Assembly
Airbag Sensor Assembly Steering Sensor
Skid Control ECU (Brake Booster with Master Cylinder Assembly) Power Steering ECU Assembly
Certification ECU (Smart Key ECU Assembly)*8 Power Back Door ECU (Multiplex Network Door ECU)*9
Air Conditioning Amplifier Assembly Main Body ECU (Multiplex Network Body ECU)
Parking Brake ECU Option Connector (Bus Buffer ECU)*10
Vehicle Approaching Speaker Controller*11 Electrical Key and TPMS Receiver Assembly*8*12 / Door Control and Tire Pressure Monitoring System Receiver Assembly*12*13


DIAGNOSIS


a.

If a malfunction occurs on a CAN communication bus, ECUs that are connected to the CAN communication bus store Diagnostic Trouble Codes (DTCs) in memory.


b.

The 5-digit DTCs can be read by connecting the GTS to the DLC3.


c.

For details, refer to the Repair Manual.