FUNCTION
|
*1: Models with blind spot monitor system *2: Models with parking assist monitor system *3: Models with parking support brake system *4: Models with panoramic view monitor system *5: Models with headup display *6: Models with DCM (telematics transceiver) *7: Models with smart entry and start system *8: Models with power back door system *9: Models with CAN compatible dealer optional devices *10: Models with tire pressure warning system *11: Models without smart entry and start system *12: Models with Radio and Display Receiver Assembly *13: Models with Toyota Safety Sense |
|
| Central Gateway ECU (Network Gateway ECU) | Forward Recognition Camera*13 |
| Millimeter Wave Radar Sensor Assembly*13 | Blind Spot Monitor Sensor LH*1 |
| Rear Television Camera Assembly*2 | Clearance Warning ECU Assembly*3 |
| Parking Assist ECU*4 | Transmission Control ECU |
| ECM | Headup Display (Meter Mirror Sub-assembly)*5 |
| DCM (Telematics Transceiver)*6 | Radio and Display Receiver Assembly*12 |
| Combination Meter Assembly | Skid Control ECU (Brake Actuator Assembly) |
| Airbag Sensor Assembly | Steering Sensor |
| Power Steering ECU Assembly | Certification ECU (Smart Key ECU Assembly)*7 |
| Power Back Door ECU (Multiplex Network Door ECU)*8 | Air Conditioning Amplifier Assembly |
| Main Body ECU (Multiplex Network Body ECU) | Option Connector (Bus Buffer ECU)*9 |
| Electrical Key and TPMS Receiver Assembly*7*10/ Door Control and Tire Pressure Monitoring System Receiver Assembly*10*11 | - |
DIAGNOSIS
If a malfunction occurs on a CAN communication bus, ECUs that are connected to the CAN communication bus store Diagnostic Trouble Codes (DTCs) in memory.
The 5-digit DTCs can be read by connecting the GTS to the DLC3.
For details, refer to the Repair Manual.