CONSTRUCTION
Models without Adaptive High Beam System
The light control LED ECU LH and RH illuminate the LED used as a light source for the low beam headlights, high beam headlights and clearance lights. When the low beam headlights or high beam headlights are illuminated, a constant current flows to the LED to instantly stabilize the headlights. Also, changes in the LED current due to fluctuations in the voltage are reduced to prevent the lights from flickering.
| *1 | Light Control LED ECU | - | - |
| *a | The illustrations shown are examples only. | - | - |
Models with Adaptive High Beam System
The headlight ECU sub-assembly LH and RH illuminates the LED used as a light source for the headlight assembly. When the headlights are illuminated, a constant current flows to the LED to instantly stabilize the headlights. Also, changes in the LED current due to fluctuations in the voltage are reduced to prevent the lights from flickering.
The headlight ECU sub-assembly LH controls the automatic headlight beam level control system and adaptive high beam system.
| *1 | Light Control LED ECU | *2 | Headlight ECU Sub-assembly |
| *a | The illustrations shown are examples only. | - | - |