Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM (for HV Model TMC Made) › from 2021.07
NM3700E _54 Brake _094748 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0487071 BRAKE CONTROL SYSTEM(for HV Model TMC Made) GE GENERAL F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM(for HV Model TMC Made)  GENERAL  GENERAL  


OUTLINE


a.

The following brake control systems are provided: Anti-lock Brake System (ABS), Electronic Brake force Distribution (EBD), brake assist, Traction Control (TRC), Vehicle Stability Control (VSC), Crosswind Assist (CWA), Active Cornering Assist (ACA), hill-start assist control, downhill assist control*, brake hold, steering cooperative control, emergency brake signal, secondary collision brake and TRAIL mode*.


b.

TRAIL Mode is used. When TRAIL Mode is turned on, the system switches to the optimal control for 4WD/AWD control, brake control and motive force control. As a result, excellent driving performance on rough roads is achieved.*

*: AWD models



MAIN FEATURES


a.

Electronically Controlled Brake System

i.

The electronically controlled brake system uses a sensor to detect the amount of brake pedal depression. Based on this, the skid control ECU calculates the braking force and the brake booster with master cylinder assembly, brake booster pump assembly and brake actuator assembly control the brake fluid pressure of the 4 wheels.


ii.

The electronically controlled brake system cooperates with the hybrid system to optimally control the brake fluid pressure and regenerative braking. This enhances the efficiency of energy regeneration and improves fuel economy.


iii.

When the system is malfunctioning, brake control continues via the use of non-malfunctioning parts. Also, when the system is not operating, the brake fluid pressure generated in the brake master cylinder by the depression of the brake pedal works as a back-up mechanism to ensure braking force.

Control Outline
X131263E06
1.135,0.594 3.146,1.063 2.01,0.469 10 false Master Cylinder 1.073,0.146 4.198,0.646 3.125,0.5 10 false Brake Booster with Master Cylinder Assembly 1.167,0.948 3.177,1.417 2.01,0.469 10 false - Input 2.031,0.958 4.042,1.427 2.01,0.469 10 false Generates brake pedal feel 2.042,1.313 4.052,1.781 2.01,0.469 10 false Detects the brake pedal stroke 1.167,1.646 3.094,2 1.927,0.354 10 false - Output 2.052,1.646 5.323,2.063 3.271,0.417 10 false Supplies brake fluid pressure from the master cylinder to the wheel cylinders 2.302,2.594 3.802,2.906 1.5,0.313 10 false Skid Control ECU 2.313,2.948 4.708,3.302 2.396,0.354 10 false Brake Control Function (Service Brake, ABS, TRC, VSC, etc.) 2.323,3.615 4.719,3.969 2.396,0.354 10 false Regenerative Cooperative Control 0.302,2.604 1.604,3 1.302,0.396 10 false Brake Booster Pump Assembly 0.292,3.208 1.573,3.667 1.281,0.458 10 false Maintains brake fluid pressure for control 1.219,4.344 3.615,4.698 2.396,0.354 10 false Brake Actuator 1.146,4.698 3.542,5.052 2.396,0.354 10 false - Fluid Pressure Control Portion 1.208,5.083 5.146,5.427 3.938,0.344 10 false Adjusts the fluid pressure in the back of the master cylinder 1.25,5.844 4.344,6.146 3.094,0.302 10 false Switches the oil path when malfunctioning. 1.156,5.479 4.667,5.802 3.51,0.323 10 false - Brake Fluid Pressure Switching Portion for Fail-safe 1.354,6.75 4.448,7.052 3.094,0.302 10 false : Control Signal Flow 1.344,7.292 4.438,7.594 3.094,0.302 10 false : Brake Fluid Pressure Flow 5.375,4.365 7.031,4.75 1.656,0.385 10 false Brake Actuator Assembly 5.385,4.802 6.958,5.365 1.573,0.563 10 false Adjusts the fluid pressure of each wheel for ABS, TRC and VSC 5.958,6.875 6.625,7.115 0.667,0.24 10 false Wheel


iv.

Brake control apportions brake force to the hydraulic brake system and regenerative brake system at varying vehicle speeds as follows.

X131270E01
3.323,0.042 5.219,0.573 1.896,0.531 10 false Braking Force Based on Brake Pedal Depression by Driver 1.313,1.688 1.823,2.115 0.51,0.427 10 false Braking Force 1.458,3.26 2.583,3.5 1.125,0.24 10 false Start of Braking 5.094,3.26 6.219,3.5 1.125,0.24 10 false Stop 2.719,3.406 4.875,3.635 2.156,0.229 10 false Example of Cooperative Control 3.635,2.271 5.104,2.646 1.469,0.375 10 true Braking Force by Motor (Energy Regeneration) 2.99,1.271 4.094,1.781 1.104,0.51 10 false Hydraulic Braking Force

X131271E05
2.094,0.573 2.313,0.573 2.313,0.573 2.583,0.948 false 5.542,0.604 5.76,0.604 5.76,0.604 6.031,0.979 false 2,3.948 2.219,3.948 2.219,3.948 2.49,4.323 false 4.667,4.125 5.958,4.365 1.292,0.24 10 false Hydraulic Brake 4.667,4.635 5.958,4.875 1.292,0.24 10 false Motor Brake 0.438,0.708 0.802,0.958 0.365,0.25 10 false High 3.969,0.708 4.333,0.958 0.365,0.25 10 false High 0.438,3.99 0.802,4.24 0.365,0.25 10 false High 0.344,1.26 0.844,1.698 0.5,0.438 10 false Braking Force 3.865,1.219 4.365,1.656 0.5,0.438 10 false Braking Force 0.333,4.594 0.833,5.031 0.5,0.438 10 false Braking Force 1.25,2.219 2.521,2.594 1.271,0.375 10 false Depression Force of Brake Pedal 4.771,2.229 6.042,2.604 1.271,0.375 10 false Depression Force of Brake Pedal 1.292,5.552 2.563,5.927 1.271,0.375 10 false Depression Force of Brake Pedal 2.781,2.292 3.146,2.542 0.365,0.25 10 false High 6.313,2.302 6.677,2.552 0.365,0.25 10 false High 2.781,5.625 3.146,5.875 0.365,0.25 10 false High 1.76,5 3.031,5.375 1.271,0.375 10 false Hydraulic Brake 2.021,1.469 3.292,1.844 1.271,0.375 10 false Hydraulic Brake 5.896,1.26 7.021,1.531 1.125,0.271 10 false Hydraulic Brake 1.219,0.448 2.052,0.938 0.833,0.49 10 false Total Braking Force 4.667,0.51 5.5,1 0.833,0.49 10 false Total Braking Force 1.125,3.854 1.958,4.344 0.833,0.49 10 false Total Braking Force 1.375,3.104 2.646,3.479 1.271,0.375 10 false At high speeds 4.625,3.104 6.188,3.448 1.563,0.344 10 false At mid or low speeds 0.552,6.5 3.74,6.917 3.188,0.417 10 false When shift position is in N or at low speeds 1.229,7.229 6.427,7.531 5.198,0.302 10 false Brake force by hydraulic and regenerative brake system at different vehicle speeds




PRECAUTION


a.

ABS

i.

The ABS system cannot increase the performance limit of the tires. Always drive safely and be aware of the vehicle speed and distance to other vehicles.


ii.

Any non-standard components such as non-standard tires that are installed may have a negative effect on the ABS function.


iii.

When braking using ABS, the braking distance may be longer than vehicles without ABS in the following conditions:

·

When driving on a dirt road or a road covered with fresh snow

·

When using tire chains

·

When driving over a joint in the road surface

·

When driving on a rough road such as an unpaved or stone-paved road




b.

Brake Assist

i.

Brake assist cannot increase the performance limit of the fundamental brake system. Always drive safely and be aware of the vehicle speed and distance to other vehicles.



c.

TRC, VSC

i.

The TRC and VSC systems enhance traction and vehicle stability. Do not disable the TRC or VSC functions unless necessary.


ii.

The TRC and VSC systems cannot increase the performance limit of the tires. Always drive the vehicle carefully in conditions in which drive wheel traction or vehicle stability may be lost.



d.

Active Cornering Assist (ACA)

i.

Active Cornering Assist (ACA) cannot increase the performance limit or innate maneuverability of the vehicle itself.


ii.

Do not overly rely on Active Cornering Assist (ACA). Active Cornering Assist (ACA) may not operate effectively when accelerating down slopes or driving on slippery road surfaces.


iii.

When Active Cornering Assist (ACA) frequently operates, Active Cornering Assist (ACA) may temporarily stop operating to ensure proper operation of the brakes, TRC and VSC.



e.

Hill-start Assist Control

i.

Hill-start assist control is not intended to keep the vehicle stationary on a hill for a prolonged period. As hill-start assist control only prevents the vehicle from rolling backwards for 2 seconds after the brake pedal is released, perform start-off within this period.


ii.

When hill-start assist control is operating and the ignition switch is turned off, hill-start assist control will be canceled without warning.


iii.

Hill-start assist control prevents the vehicle from rolling backwards by controlling the brake force to the 4 wheels. However, the vehicle may not remain stationary when on an extremely steep slope or a low friction surface such as ice.



f.

Downhill Assist Control

i.

Check that the downhill assist control indicator light is illuminated before driving. While downhill assist control is operating, the slip indicator light in the combination meter blinks and the brake lights illuminate.


ii.

When downhill assist control operates continuously, the temperature inside the brake actuator increases and downhill assist control may be temporarily canceled.


iii.

At this time, a buzzer in the combination meter assembly sounds and the downhill assist control indicator light blinks to inform the driver that downhill assist control is canceled. When the temperature inside the brake actuator decreases and the downhill assist control indicator returns to the illuminated condition, control via downhill assist control is possible.


iv.

On extremely steep slopes and extremely slippery surfaces such as snow-covered roads, it may not be possible to maintain a set vehicle speed.



g.

Brake Hold

i.

The brake hold is not for parking the vehicle for a long period of time in the same way as the parking brake.


ii.

If brake hold control does not operate even when the vehicle stops, depress the brake pedal again firmly to stop the vehicle. If the vehicle still does not stop, confirm the conditions for brake hold control to operate.


iii.

When the power switch is turned off during brake hold operation, control stops.


iv.

This function may not stop the vehicle on steep slopes and slippery roads.



h.

TRAIL Mode

i.

TRAIL Mode is not intended to expand the limits of the vehicle. Thoroughly check the road conditions and drive with caution.


ii.

TRAIL Mode may not be effective enough depending on the road conditions (pitch, slipperiness and undulations). Thoroughly check the road conditions before driving.


iii.

TRAIL Mode controls the vehicle so that the motive force can be maximized to improve driveability on rough roads. Therefore, the fuel economy will not be as efficient as when driving without TRAIL Mode.


iv.

Only use TRAIL Mode when driving on rough roads, and turn TRAIL Mode off at all other times.