CONSTRUCTION
Torsion-beam type suspension (2WD Models)
A hollow type stabilizer bar has been adopted, with expanded sections at the ends to achieve both high roll rigidity and reduced weight.
| *1 | Rear Stabilizer Bar | - | - |
| *a | The illustrations shown are examples only. | - | - |
Double-wishbone type suspension (AWD Models)
A hollow type stabilizer bar has been adopted, with a high-performance stabilizer layout to achieve both high roll rigidity and reduced weight.
Both ends of the stabilizer bar are mounted to the upper arm via the stabilizer link, providing high rolling stiffness and initial responsiveness.
| *1 | Stabilizer Link Assembly | *2 | Rear Stabilizer Bush |
| *3 | Rear Stabilizer Bar | - | - |
| *a | The illustrations shown are examples only. | - | - |