Home › Drivetrain › K320 (MULTIDRIVE / CVT) › COMBINATION SWITCH
RM3700E _52 Drivetrain _092906 K320 MULTIDRIVE / CVT _0438038 COMBINATION SWITCH G

K320 MULTIDRIVE / CVT  COMBINATION SWITCH  INSPECTION  


PROCEDURE

Hide 84970 1.INSPECT DRIVE MODE SELECT SWITCH (COMBINATION SWITCH ASSEMBLY)

a.

Check the resistance.

i.
C381674C55
1.5,0.167 1.99,0.417 0.49,0.25 2.333,1.906 2.094,1.469 true 1.083,1.958 1.344,1.49 true 0.146,0.083 0.458,0.281 0.313,0.198 10 false *a 2.323,1.938 2.833,2.146 0.51,0.208 10 false E 0.948,1.969 1.406,2.167 0.458,0.198 10 false MSW1 1.625,0.219 2.083,0.417 0.458,0.198 10 false H18
*a Component without harness connected
(Drive Mode Select Switch (Combination Switch Assembly))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(H18)Location & Routing

Click Connector(H18)Instrument Panel>Instrument Panel Wire / Speaker Wire>Combination Switch Assembly

H18-8(MSW1) - H18-5(E) Switch pushed Below 1 Ω
H18-8(MSW1) - H18-5(E) Switch not pushed 10 kΩ or higher


If the result is not as specified, replace the drive mode select switch (combination switch assembly).



b.

Check the illumination.

i.
C381674C54
1.5,0.167 2,0.417 0.5,0.25 2.083,1.135 2.615,0.396 true 0.792,0.427 1.354,1.146 true 0.146,0.083 0.458,0.281 0.313,0.198 10 false *a 0.635,0.271 1.094,0.469 0.458,0.198 10 false ILL+ 2.5,0.219 2.958,0.417 0.458,0.198 10 false ILL- 1.625,0.219 2.083,0.417 0.458,0.198 10 false H18
*a Component without harness connected
(Drive Mode Select Switch (Combination Switch Assembly))


Apply auxiliary battery voltage to the drive mode select switch (combination switch assembly).

OK:
Tester Connection Condition Specified Condition

Click Location & Routing(H18)Location & Routing

Click Connector(H18)Instrument Panel>Instrument Panel Wire / Speaker Wire>Combination Switch Assembly

H18-4(ILL+) - H18-1(ILL-) H18-4(ILL+) - Auxiliary battery positive (+)
H18-1(ILL-) - Auxiliary battery negative (-)
The drive mode select switch (combination switch assembly) illumination illuminates.


If the result is not as specified, replace the drive mode select switch (combination switch assembly).