Home › Vehicle Exterior › WIPER / WASHER › REAR WIPER MOTOR
RM3700E _59 Vehicle Exterior _092999 WIPER / WASHER _0438354 REAR WIPER MOTOR G

WIPER / WASHER  REAR WIPER MOTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85120R 1.INSPECT REAR WIPER MOTOR AND BRACKET ASSEMBLY

a.

Operate the rear wiper motor and bracket assembly.


b.

Stop the rear wiper motor and bracket assembly operation.


c.
B586324C01
1.677,2.521 1.844,2.823 true 1.354,2.26 1.469,2.438 0.115,0.177 10 true A 1.875,2.76 2.073,2.938 0.198,0.177 10 true *a 1.354,2.542 1.469,2.719 0.115,0.177 10 true A
*a Alignment Mark


Check the automatic stop position.

HINT:

After the rear wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.


Standard Clearance:
Area Measurement
A 10 mm (0.394 in.)


OK:

The rear wiper stops at the position shown in the illustration.