85120R
1.INSTALL REAR WIPER MOTOR AND BRACKET ASSEMBLY
Check that the rear wiper motor and bracket assembly operates.
Check that the body ground is connected.
| *a | Component without harness connected
(Rear Wiper Motor and Bracket Assembly) |
Apply auxiliary battery voltage to the rear wiper motor connector and check the speed of the rear wiper motor and bracket assembly.
| Tester Connection | Specified Condition |
|---|---|
|
Click Location & Routing(Y5)Location & Routingewd_type=routing;type=c;code=Y5 Click Connector(Y5)Body>No. 2 Back Door Wire>Rear Wiper Motor and Bracket Assemblyewd_type=component;type=c;code=Y5;pinno=4,3,5 |
|
| Y5-4 (+B) - Auxiliary battery positive (+)
Y5-3 (LS) - Auxiliary battery negative (-) Y5-5 (E) - Auxiliary battery negative (-) |
Motor operates |
If the result is not as specified, replace the rear wiper motor and bracket assembly.