Home › Vehicle Interior › SEAT BELT › SEAT BELT WARNING SYSTEM › 2020.08–2021.07
RM3700E _58 Vehicle Interior _092991 SEAT BELT _0438367 SEAT BELT WARNING SYSTEM D

SEAT BELT  SEAT BELT WARNING SYSTEM  SYSTEM DESCRIPTION  


SEAT BELT WARNING SYSTEM DESCRIPTION


a.

Seat belt warning light operation for driver seat belt:

i.

The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with the driver seat belt state, vehicle speed, shift lever position and parking brake state.



b.

Seat belt warning light operation for front passenger seat belt:

i.

The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with whether the front passenger seat is occupied, the front passenger seat belt state, vehicle speed, shift lever position and parking brake state.



c.

Seat belt warning light operation for rear seat belt:

i.

The rear seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with the vehicle speed, rear seat belt state and rear seat occupant state.



d.

Seat belt warning buzzer operation for front seat belt:

i.

When the vehicle is driven at approximately 20 km/h (12 mph) or more with the front passenger seat occupied and the driver or front passenger seat belt not fastened, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 24 seconds.

After that, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 0.4 seconds for 100 seconds.



e.

Seat belt warning buzzer operation for rear seat belt:

i.

When the vehicle is driven at approximately 20 km/h (12 mph) or more with a rear seat occupied and the rear seat belt not fastened, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 24 seconds.

After that, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 0.4 seconds for 100 seconds.




FUNCTION OF MAIN COMPONENTS


Component Function
Front seat inner belt assembly (for driver side) Informs the main body ECU (multiplex network body ECU) of the driver seat belt condition (fastened or unfastened).
Front seat inner belt assembly (for front passenger side) Informs the combination meter assembly of the front passenger seat belt condition (fastened or unfastened).
Occupant detection sensor (separate type front seat cushion pad (front passenger seat)) Informs the combination meter assembly of the front passenger seat condition (occupied or unoccupied).
Occupant detection sensor (rear seat cushion pad sub-assembly (LH/center/RH)) Informs the combination meter assembly of the rear seat condition (occupied or unoccupied).
Combination meter assembly
·

Illuminates, blinks or turns off the seat belt warning light.

·

Illuminates, blinks or turns off the rear seat belt warning light.

·

Sounds the seat belt warning buzzer.


·

Rear seat inner with center belt assembly LH

·

Rear seat inner belt assembly RH


Informs the combination meter assembly of each rear seat belt condition (fastened or unfastened).
Main body ECU (multiplex network body ECU) Sends the driver seat belt buckle switch, parking brake signal and rear door courtesy light switch signal*1*2 to the combination meter assembly via CAN communication.
Skid control ECU (brake booster with master cylinder assembly)*1 Sends the vehicle speed signal to the combination meter assembly via CAN communication.
Skid control ECU (brake actuator assembly)*2
Hybrid vehicle control ECU*1 Sends the shift position signal to the combination meter assembly via CAN communication.
ECM*2

*1: for HV Model

*2: for Gasoline Model