Home › Vehicle Interior › HEATING / AIR CONDITIONING › FRONT EVAPORATOR TEMPERATURE SENSOR
RM3700E _58 Vehicle Interior _093020 HEATING / AIR CONDITIONING _0438498 FRONT EVAPORATOR TEMPERATURE SENSOR G

HEATING / AIR CONDITIONING  FRONT EVAPORATOR TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 88625 1.INSPECT NO. 1 COOLER THERMISTOR

a.

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

E402278C03
2.167,0.25 2.667,0.5 0.5,0.25 0.563,1.667 0.333,1.5 false 5.448,1.5 5.823,1.198 false 1.708,0.354 2.021,0.51 0.313,0.156 10 false *a 0.167,1.396 0.479,1.552 0.313,0.156 10 false *b 4.083,1.229 4.396,1.385 0.313,0.156 10 false *c 5.542,2.417 5.854,2.573 0.313,0.156 10 false *d 2.344,0.281 2.677,0.438 0.333,0.156 10 false h5 5.885,1.125 6.26,1.344 0.375,0.219 10 false *e
*a Component without harness connected
(No. 1 Cooler Thermistor)
*b Sensing Portion
*c Resistance (kΩ) *d Temperature (°C (°F))
*e Allowable Range - -


Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(h5)Location & Routing

Click Connector(h5)Instrument Panel>Air Conditioning Harness>No. 1 Cooler Thermistor

h5-1 - h5-2 -10°C (14°F) 7.30 to 9.10 kΩ
h5-1 - h5-2 -5°C (23°F) 5.65 to 6.95 kΩ
h5-1 - h5-2 0°C (32°F) 4.40 to 5.35 kΩ
h5-1 - h5-2 5°C (41°F) 3.40 to 4.15 kΩ
h5-1 - h5-2 10°C (50°F) 2.70 to 3.25 kΩ
h5-1 - h5-2 15°C (59°F) 2.14 to 2.58 kΩ
h5-1 - h5-2 20°C (68°F) 1.71 to 2.05 kΩ
h5-1 - h5-2 25°C (77°F) 1.38 to 1.64 kΩ
h5-1 - h5-2 30°C (86°F) 1.11 to 1.32 kΩ


NOTICE:
·

Hold the sensor only by its connector. Touching the sensing portion may change the resistance value.

·

When measuring, the sensor temperature must be the same as the ambient temperature.



If the specified condition is not met, replace the No. 1 cooler thermistor.