Home › Vehicle Exterior › LIGHTING (EXT) › REAR LIGHT ASSEMBLY (for LED Headlight) › 2020.08–2021.07
RM3700E _59 Vehicle Exterior _093283 LIGHTING (EXT) _0440212 REAR LIGHT ASSEMBLY(for LED Headlight) G

LIGHTING (EXT)  REAR LIGHT ASSEMBLY(for LED Headlight)  INSPECTION  


PROCEDURE

Hide 81536D 1.INSPECT TAIL LIGHT LED (for LH Side)

a.

Check that the tail light LED

i.
E433390C08
1.438,0.094 1.938,0.344 0.5,0.25 1.135,1.76 1.552,1.344 true 2.271,1.792 1.854,1.344 true 0.104,0.083 0.417,0.281 0.313,0.198 10 false *a 1.542,0.156 2.021,0.323 0.479,0.167 10 false O105 1.052,1.792 1.188,1.969 0.135,0.177 10 false B 2.292,1.802 2.427,1.979 0.135,0.177 10 false E
*a Component without harness connected
(Tail Light LED)


Apply auxiliary battery voltage to the tail light LED and check that the light comes on.

OK:
Condition Specified Condition
O105-2(B) - Auxiliary battery positive(+)
O105-1(E) - Auxiliary battery negative(-)
Tail light LED comes on


If the result is not as specified, replace the Tail light LED.



Hide 81536D 2.INSPECT TAIL LIGHT LED (for RH Side)

a.

Check that the tail light LED

i.
E433390C10
1.438,0.094 1.938,0.344 0.5,0.25 1.135,1.76 1.552,1.344 true 2.271,1.792 1.854,1.344 true 0.104,0.083 0.417,0.281 0.313,0.198 10 false *a 1.542,0.156 2.021,0.323 0.479,0.167 10 false O108 1.052,1.792 1.188,1.969 0.135,0.177 10 false B 2.292,1.802 2.427,1.979 0.135,0.177 10 false E
*a Component without harness connected
(Tail Light LED)


Apply auxiliary battery voltage to the tail light LED and check that the light comes on.

OK:
Condition Specified Condition
O108-2(B) - Auxiliary battery positive(+)
O108-1(E) - Auxiliary battery negative(-)
Tail light LED comes on


If the result is not as specified, replace the Tail light LED.



Hide 81591B 3.INSPECT REAR LIGHT LENS AND BODY LH

a.

Check that the rear light lens and body LH

i.
E451675C01
1.479,0.125 1.854,0.323 0.375,0.198 1.01,0.354 1.198,0.854 true 1.875,0.854 2.25,0.417 true 0.115,0.104 0.427,0.26 0.313,0.156 10 false *a 0.865,0.219 1.198,0.385 0.333,0.167 10 false TRN 2.271,0.271 2.427,0.469 0.156,0.198 10 false E 1.552,0.167 1.885,0.313 0.333,0.146 10 false Y12
*a Component without harness connected
(Rear Light Lens and Body LH)


Apply auxiliary battery voltage to the rear light lens and body LH and check that the light comes on.

OK:
Condition Specified Condition
Y12-4(TRN) - Auxiliary battery positive(+)
Y12-2(E) - Auxiliary battery negative(-)
Rear turn signal light comes on


·

If there is something wrong with the rear light lens and body LH, measure the resistance between the terminals for an open or short in the wiring.

·

If no abnormality is found in the wiring, replace the rear light lens and body LH.

·

If abnormality is found in the wiring, replace the rear light socket & wire LH.




Hide 81581C 4.INSPECT REAR LIGHT LENS AND BODY RH

a.

Check that the rear light lens and body RH

i.
E451675C05
1.479,0.125 1.854,0.323 0.375,0.198 1.01,0.354 1.198,0.854 true 1.875,0.854 2.25,0.417 true 0.115,0.104 0.427,0.26 0.313,0.156 10 false *a 0.865,0.219 1.198,0.385 0.333,0.167 10 false TRN 2.271,0.271 2.427,0.469 0.156,0.198 10 false E 1.552,0.167 1.885,0.313 0.333,0.146 10 false Y14
*a Component without harness connected
(Rear Light Lens and Body RH)


Apply auxiliary battery voltage to the rear light lens and body RH and check that the light comes on.

OK:
Condition Specified Condition
Y14-4(TRN) - Auxiliary battery positive(+)
Y14-2(E) - Auxiliary battery negative(-)
Rear turn signal light comes on


·

If there is something wrong with the rear light lens and body RH, measure the resistance between the terminals for an open or short in the wiring.

·

If no abnormality is found in the wiring, replace the rear light lens and body RH.

·

If abnormality is found in the wiring, replace the rear light socket & wire RH.




Hide 81536G 5.INSPECT BACK-UP LIGHT LED (for LH Side)

a.

Check that the back-up light LED

i.
E451675C06
1.479,0.125 1.854,0.323 0.375,0.198 1.885,1.333 2.073,1.833 true 1.875,0.854 2.25,0.417 true 0.115,0.104 0.427,0.26 0.313,0.156 10 false *a 2.083,1.875 2.198,2.042 0.115,0.167 10 false B 2.271,0.271 2.427,0.469 0.156,0.198 10 false E 1.552,0.167 1.885,0.313 0.333,0.146 10 false Y12
*a Component without harness connected
(Back-up Light LED)


Apply auxiliary battery voltage to the back-up light LED and check that the light comes on.

OK:
Condition Specified Condition
Y12-6(B) - Auxiliary battery positive(+)
Y12-2(E) - Auxiliary battery negative(-)
Back-up light LED comes on


·

If there is something wrong with the back-up light LED, measure the resistance between the terminals for an open or short in the wiring.

·

If no abnormality is found in the wiring, replace the back-up light LED.

·

If abnormality is found in the wiring, replace the rear light socket & wire LH.




Hide 8158AD 6.INSPECT REAR FOG LIGHT LED (for RH Side)

a.

Check that the rear fog light LED

i.
E451675C07
1.479,0.125 1.854,0.323 0.375,0.198 1.26,0.427 1.531,0.854 true 1.875,0.854 2.25,0.417 true 0.115,0.104 0.427,0.26 0.313,0.156 10 false *a 1.198,0.281 1.344,0.427 0.146,0.146 10 false B 2.271,0.271 2.427,0.469 0.156,0.198 10 false E 1.552,0.167 1.885,0.313 0.333,0.146 10 false Y14
*a Component without harness connected
(Rear Fog Light LED)


Apply auxiliary battery voltage to the rear fog light LED and check that the light comes on.

OK:
Condition Specified Condition
Y14-3(B) - Auxiliary battery positive(+)
Y14-2(E) - Auxiliary battery negative(-)
Rear fog light LED comes on


·

If there is something wrong with the rear fog light LED, measure the resistance between the terminals for an open or short in the wiring.

·

If no abnormality is found in the wiring, replace the rear fog light LED.

·

If abnormality is found in the wiring, replace the rear light socket & wire RH.