81440B
1.INSPECT DAYTIME RUNNING LIGHT ASSEMBLY LH (for LED Type Turn Signal Light)
Check that the daytime running light assembly LH
| *a | Component without harness connected
(Daytime Running Light Assembly LH) |
Apply auxiliary battery voltage to the daytime running light assembly LH and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| B12-2(B) - Auxiliary battery positive (+)
B12-4(DRLC) - Auxiliary battery negative (-) B12-1(E) - Auxiliary battery negative (-) |
Daytime running light comes on |
| B12-3(B) - Auxiliary battery positive (+)
B12-1(E) - Auxiliary battery negative (-) |
Front turn signal light comes on |
If the result is not as specified, replace the daytime running light assembly LH.
81430C
2.INSPECT DAYTIME RUNNING LIGHT ASSEMBLY RH (for LED Type Turn Signal Light)
Check that the daytime running light assembly RH
| *a | Component without harness connected
(Daytime Running Light Assembly RH) |
Apply auxiliary battery voltage to the daytime running light assembly RH and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| B13-2(B) - Auxiliary battery positive (+)
B13-4(DRLC) - Auxiliary battery negative (-) B13-1(E) - Auxiliary battery negative (-) |
Daytime running light comes on |
| B13-3(B) - Auxiliary battery positive (+)
B13-1(E) - Auxiliary battery negative (-) |
Front turn signal light comes on |
If the result is not as specified, replace the daytime running light assembly RH.
81161A
3.INSPECT DAYTIME RUNNING LIGHT LED (for LH Side)
Check that the daytime running light LED
| *a | Component without harness connected
(Daytime Running Light LED) |
Apply auxiliary battery voltage to the daytime running light LED and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| B10-2(B) - Auxiliary battery positive (+)
B10-1(E) - Auxiliary battery negative (-) |
Daytime running light LED comes on |
If the result is not as specified, replace the daytime running light LED.
81161A
4.INSPECT DAYTIME RUNNING LIGHT LED (for RH Side)
Check that the daytime running light LED
| *a | Component without harness connected
(Daytime Running Light LED) |
Apply auxiliary battery voltage to the daytime running light LED and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| B11-2(B) - Auxiliary battery positive (+)
B11-1(E) - Auxiliary battery negative (-) |
Daytime running light LED comes on |
If the result is not as specified, replace the daytime running light LED.