25620
1.INSPECT EGR VALVE ASSEMBLY
| *a | Component without wire harness connected
(EGR Valve Assembly) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
Click Location & Routing(D37)Location & Routingewd_type=routing;type=c;code=D37 Click Connector(D37)Engine Compartment>Engine Wire>EGR Valve Assemblyewd_type=component;type=c;code=D37;pinno=1,2,3,4 |
||
| D37-1 (EGA+) - D37-2 (EGA-) | 20°C (68°F) | 3.1 to 3.7 Ω |
| D37-3 (EGB-) - D37-4 (EGB+) | 20°C (68°F) | 3.1 to 3.7 Ω |
If the result is not as specified, replace the EGR valve assembly.