1.INSPECT FUEL PUMP ASSEMBLY
| *a | Component without harness connected
(Fuel Pump Assembly) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
Click Location & Routing(D24)Location & Routingewd_type=routing;type=c;code=D24 Click Connector(D24)Engine Compartment>Engine Wire>Fuel Pump Assemblyewd_type=component;type=c;code=D24;pinno=1,2 |
||
| D24-1 - D24-2 | 20°C (68°F) | 0.45 to 0.55 Ω |
If the result is not as specified, replace the fuel pump assembly.