| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | FUEL SENDER GAUGE ASSEMBLY | 83320 | - | - | - |
| 2 | SUB-ASSEMBLY SUPPORT | - | - | - | - |
| 3 | FUEL PUMP HARNESS | 77785 | - | - | - |
| 4 | NO. 1 CAP | - | - | - | - |
| 5 | FUEL PUMP ASSEMBLY WITH MOTOR AND BRACKET | 23210A | - | - | - |
| ● | Non-reusable part | - | - |
| *a | Tube |
Do not disconnect the tube shown in the illustration when disassembling the fuel suction tube with pump and gauge assembly. Doing so will cause reassembly of the fuel suction tube with pump and gauge assembly to be impossible as the tube is pressed into the fuel suction plate sub-assembly.
83320
1.REMOVE FUEL SENDER GAUGE ASSEMBLY
2.REMOVE SUB-ASSEMBLY SUPPORT
77785
3.REMOVE FUEL PUMP HARNESS
4.REMOVE NO. 1 CAP
23210A
5.REMOVE FUEL PUMP ASSEMBLY WITH MOTOR AND BRACKET