HYBRID VEHICLE CONTROL ECU
| Terminal No.
(Symbol) |
Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| H44-13 (BATT) - H44-15 (E1) | Constant power source | Always | 10 to 14 V |
| H44-7 (+B1) - H44-15 (E1) | Power source | Ignition switch ON | 11 to 14 V |
| H44-8 (+B2) - H44-15 (E1) | Power source | Ignition switch ON | 11 to 14 V |
| A68-33 (IGR) - H44-15 (E1) | Power source | Ignition switch ON | 11 to 14 V |
| H44-26 (IGP) - H44-15 (E1) | Power source | Ignition switch ON | 11 to 14 V |
| A68-13 (HMCH) - H44-15 (E1) | Communication signal | Ignition switch ON | Pulse generation
(Waveform 1) |
| A68-2 (HMCL) - H44-15 (E1) | Communication signal | Ignition switch ON | Pulse generation
(Waveform 1) |
| H44-47 (MREL) - H44-15 (E1) | Main relay | Ignition switch ON | 11 to 14 V |
| A68-9 (HSDN) - H44-15 (E1) | MG ECU shutdown signal | Ignition switch ON (READY) | 0 to 1.5 V |
| A68-6 (STP) - H44-15 (E1) | Stop light switch | Brake pedal depressed | 11 to 14 V |
| Brake pedal released | 0 to 1.5 V | ||
| A68-28 (LIN3) - H44-15 (E1) | LIN communication signal
(A/C inverter, auxiliary battery state sensor) |
Ignition switch ON (READY) | Pulse generation |
| A68-1 (DRN5) - Body ground | Shield ground | Always | Below 1 Ω |
| A68-8 (R) - H44-15 (E1) | Shift lever position signal | Ignition switch ON, shift lever in R | 7.5 to 14 V |
| Ignition switch ON, shift lever not in R | 0 to 1.5 V | ||
| A68-7 (DB1) - H44-15 (E1) | Shift lever position signal | Ignition switch ON, shift lever in D or B | 7.5 to 14 V |
| Ignition switch ON, shift lever not in D or B | 0 to 1.5 V | ||
| A68-18 (DB2) - H44-15 (E1) | Shift lever position signal | Ignition switch ON, shift lever in D or B | 7.5 to 14 V |
| Ignition switch ON, shift lever not in D or B | 0 to 1.5 V | ||
| A68-20 (PR) - H44-15 (E1) | Shift lever position signal | Ignition switch ON, shift lever in P or R | 7.5 to 14 V |
| Ignition switch ON, shift lever not in P or R | 0 to 1.5 V | ||
| A68-21 (P) - H44-15 (E1) | Shift lever position signal | Ignition switch ON, shift lever in P | 7.5 to 14 V |
| Ignition switch ON, shift lever not in P | 0 to 1.5 V | ||
| A68-29 (N) - H44-15 (E1) | Shift lever position signal | Ignition switch ON, shift lever in N | 7.5 to 14 V |
| Ignition switch ON, shift lever not in N | 0 to 1.5 V | ||
| A68-30 (PNB) - H44-15 (E1) | Shift lever position signal | Ignition switch ON, shift lever in P or N | 7.5 to 14 V |
| A68-14 (PSFT) - H44-15 (E1) | Shift lever position sensor power source | Ignition switch on ACC | 7.5 to 14 V |
| A68-38 (VCPA) - A68-37 (EPA) | Accelerator pedal (with sensor) rod assembly power source (for VPA) | Ignition switch on ACC | 4.5 to 5.5 V |
| A68-26 (VCP2) - A68-25 (EPA2) | Accelerator pedal (with sensor) rod assembly power source (for VPA2) | Ignition switch on ACC | 4.5 to 5.5 V |
| A68-36 (VPA) - A68-37 (EPA) | Accelerator pedal (with sensor) rod assembly (for accelerator pedal position detection) | Ignition switch ON, accelerator pedal released | 0.4 to 1.4 V |
| Ignition switch ON, engine stopped, shift position P, accelerator pedal fully depressed | 2.6 to 4.5 V | ||
| A68-39 (VPA2) - A68-25 (EPA2) | Accelerator pedal (with sensor) rod assembly (for accelerator pedal sensor malfunction detection) | Ignition switch ON, accelerator pedal released | 1.0 to 2.2 V |
| Ignition switch ON, engine stopped, shift position P, accelerator pedal fully depressed | 3.4 to 5.3 V | ||
| A68-32 (NIWP) - H44-15 (E1) | Inverter water pump assembly signal | Ignition switch ON (READY) | Pulse generation
(Waveform 2) |
| A68-31 (IWP) - H44-15 (E1) | Inverter water pump assembly signal | Ignition switch ON (READY) | Pulse generation
(Waveform 2) |
| A68-41 (TTA) - A68-42 (ETTA) | Transmission fluid temperature sensor | Ignition switch ON, temperature 25°C (77°F) | 3.6 to 4.6 V |
| Ignition switch ON, temperature 60°C (140°F) | 2.2 to 3.2 V | ||
| A68-43 (MMT) - A68-44 (MMTG) | Motor temperature sensor | Ignition switch ON, temperature 25°C (77°F) | 3.6 to 4.6 V |
| Ignition switch ON, temperature 60°C (140°F) | 2.2 to 3.2 V | ||
| H44-54 (RMT)* - H44-53 (RMTG)* | Rear Motor temperature sensor | Ignition switch ON, temperature 25°C (77°F) | 3.6 to 4.6 V |
| Ignition switch ON, temperature 60°C (140°F) | 2.2 to 3.2 V | ||
| A68-45 (GMT) - A68-46 (GMTG) | Generator temperature sensor | Ignition switch ON, temperature 25°C (77°F) | 3.6 to 4.6 V |
| Ignition switch ON, temperature 60°C (140°F) | 2.2 to 3.2 V | ||
| H44-32 (ILK) - H44-15 (E1) | Interlock switch | Ignition switch ON, service plug grip installed correctly | 0 to 1.5 V |
| Ignition switch ON, service plug grip not installed | 11 to 14 V | ||
| H44-24 (CA3P) - H44-15 (E1) | CAN communication signal | Ignition switch ON | Pulse generation
(Waveform 3) |
| H44-11 (CA3N) - H44-15 (E1) | CAN communication signal | Ignition switch ON | Pulse generation
(Waveform 3) |
| H44-22 (CA1L) - H44-15 (E1) | CAN communication signal | Ignition switch ON | Pulse generation
(Waveform 4) |
| H44-9 (CA1H) - H44-15 (E1) | CAN communication signal | Ignition switch ON | Pulse generation
(Waveform 4) |
| H44-10 (CA4H) - H44-15 (E1) | CAN communication signal | Ignition switch ON | Pulse generation
(Waveform 5) |
| H44-23 (CA4L) - H44-15 (E1) | CAN communication signal | Ignition switch ON | Pulse generation
(Waveform 5) |
| H44-27 (SMRG) - A68-10 (E01) | System main relay operation signal | Ignition switch ON→Ignition switch ON (READY) | Pulse generation
(Waveform 6) |
| H44-16 (SMRP) - A68-10 (E01) | System main relay operation signal | Ignition switch ON→Ignition switch ON (READY) | Pulse generation
(Waveform 6) |
| H44-2 (SMRB) - A68-10 (E01) | System main relay operation signal | Ignition switch ON→Ignition switch ON (READY) | Pulse generation
(Waveform 6) |
| H44-12 (PLKC) - H44-15 (E1) | Shift lock release request signal | Ignition switch ON (READY), brake pedal depressed | 11 to 14 V |
| Ignition switch ON (READY) , brake pedal released | 0 to 1.5 V | ||
| A68-5 (ST1-) - H44-15 (E1) | Stop light switch signal | Ignition switch ON, brake pedal depressed | 0 to 1.5 V |
| Ignition switch ON, brake pedal released | 11 to 14 V | ||
| H44-33 (EVSW) - H44-15 (E1) | EV mode switch (combination switch assembly) signal | Ignition switch ON, EV mode switch not pushed | 11 to 14 V |
| Ignition switch ON, EV mode switch pushed and held | 0 to 1.5 V | ||
| H44-37 (PDRV) - H44-15 (E1) | Drive mode switch (combination switch assembly) signal | Ignition switch ON, drive mode switch not pushed | 11 to 14 V |
| Ignition switch ON, drive mode switch pushed and held | 0 to 1.5 V | ||
| H44-51 (ALSD)* - H44-15 (E1) | TRAIL mode switch (NO. 2 combination switch assembly) signal | Ignition switch ON, TRAIL mode switch not turned | 11 to 14 V |
| Ignition switch ON, TRAIL mode switch being turned and held | 0 to 1.5 V | ||
| H44-38 (NORM)* - H44-15 (E1) | NORMAL mode switch (NO. 2 combination switch assembly) signal | Ignition switch ON, NORMAL mode switch not pushed | 11 to 14 V |
| Ignition switch ON, NORMAL mode switch being pushed and held | 0 to 1.5 V | ||
| H44-36 (SNOW)* - H44-15 (E1) | SNOW mode switch (NO. 2 combination switch assembly) signal | Ignition switch ON, SNOW mode switch not turned | 11 to 14 V |
| Ignition switch ON, SNOW mode switch being turned and held | 0 to 1.5 V | ||
| H44-43 (IGB) - H44-15 (E1) | Power source | Ignition switch ON | 11 to 14 V |
| H44-4 (ST2) - H44-15 (E1) | Starter signal | Ignition switch ON | 0 to 1.5 V |
| H44-44 (ABFS) - H44-15 (E1) | Airbag activation signal | Ignition switch ON (READY) | Pulse generation
(Waveform 7) |
| H44-49 (BL) - H44-15 (E1) | Back-up light relay | Ignition switch ON, shift lever in R | 11 to 14 V |
| A68-10 (E01) - Body ground | Ground | Always | Below 1 Ω |
| H44-1 (E12) - Body ground | Ground | Always | Below 1 Ω |
| H44-15 (E1) - Body ground | Ground | Always | Below 1 Ω |
*: for AWD
Oscilloscope waveforms
Oscilloscope waveform samples are provided here for informational purposes. Noise and fluttering waveforms have been omitted.
Waveform 1 (Communication signal)
| Item | Content |
|---|---|
| Terminal | CH1: A68-13 (HMCH) - H44-15 (E1)
CH2: A68-2 (HMCL) - H44-15 (E1) |
| Equipment Setting | 1 V/DIV., 50 μs./DIV. |
| Condition | Ignition switch ON |
The waveform will vary depending on the content of the digital communication (digital signal).
Waveform 2 (Inverter water pump assembly signal)
| Item | Content |
|---|---|
| Terminal | CH1: A68-31 (IWP) - H44-15 (E1)
CH2: A68-32 (NIWP) - H44-15 (E1) |
| Equipment Setting | 5 V/DIV., 20 ms./DIV. |
| Condition | Ignition switch ON (READY) |
The duty of the IWP signal and the frequency of the NIWP signal change according to the coolant (for inverter) temperature.
Waveform 3 (CAN communication signal)
| Item | Content |
|---|---|
| Terminal | CH1: H44-24 (CA3P) - H44-15 (E1)
CH2: H44-11 (CA3N) - H44-15 (E1) |
| Equipment Setting | 1 V/DIV., 50 μs./DIV. |
| Condition | Ignition switch ON |
The waveform will vary depending on the content of the digital communication (digital signal).
Waveform 4 (CAN communication signal)
| Item | Content |
|---|---|
| Terminal | CH1: H44-9 (CA1H) - H44-15 (E1)
CH2: H44-22 (CA1L) - H44-15 (E1) |
| Equipment Setting | 1 V/DIV., 50 μs./DIV. |
| Condition | Ignition switch ON |
The waveform will vary depending on the content of the digital communication (digital signal).
Waveform 5 (CAN communication signal)
| Item | Content |
|---|---|
| Terminal | CH1: H44-10 (CA4H) - H44-15 (E1)
CH2: H44-23 (CA4L) - H44-15 (E1) |
| Equipment Setting | 1 V/DIV., 50 μs./DIV. |
| Condition | Ignition switch ON |
The waveform will vary depending on the content of the digital communication (digital signal).
Waveform 6 (System main relay operation signal)
| Item | Content |
|---|---|
| Terminal | CH1: H44-16 (SMRP) - A68-10 (E01)
CH2: H44-2 (SMRB) - A68-10 (E01) CH3: H44-27 (SMRG) - A68-10 (E01) |
| Equipment Setting | 10 V/DIV., 200 ms./DIV. |
| Condition | Ignition switch ON → Ignition switch ON (READY) |
Waveform 7 (Airbag activation signal)
| Item | Content |
|---|---|
| Terminal | H44-44 (ABFS) - H44-15 (E1) |
| Equipment Setting | 5 V/DIV., 125 ms./DIV. |
| Condition | Ignition switch ON (READY) |