| *1 | Hybrid Motor Control Inverter Assembly |
Since the hybrid motor control inverter assembly uses waterproof connectors, the voltage and waveforms cannot be inspected directly. Standard voltage readings and waveforms are indicated for reference only.
| Terminal No.
(Symbol) |
Terminal Description | Condition | Standard Condition |
|---|---|---|---|
| A56-1 (CANH) - A56-24 (GND1) | CAN communication signal | Ignition switch ON | Pulse generation
(Waveform 1) |
| A56-3 (CARH) - A56-24 (GND1) | CAN communication signal
(for AWD) |
Ignition switch ON | Pulse generation
(Waveform 2) |
| A56-5 (+B2) - A56-24 (GND1) | Motor generator control ECU (MG ECU) power source | Ignition switch ON | 11 to 14 V |
| A56-6 (+B) - A56-24 (GND1) | Motor generator control ECU (MG ECU) power source | Ignition switch ON | 11 to 14 V |
| A56-7 (CANL) - A56-24 (GND1) | CAN communication signal | Ignition switch ON | Pulse generation
(Waveform 1) |
| A56-9 (CARL) - A56-24 (GND1) | CAN communication signal
(for AWD) |
Ignition switch ON | Pulse generation
(Waveform 2) |
| A56-10 (GI) - A56-24 (GND1) | Camshaft position sensor signal | Ignition switch ON (READY), engine running | Pulse generation
(Waveform 3) |
| A56-12 (IGCT) - A56-24 (GND1) | Motor generator control ECU (MG ECU) power source | Ignition switch ON | 11 to 14 V |
| A56-17 (NE) - A56-24 (GND1) | Crankshaft position sensor signal | Ignition switch ON (READY), engine running | Pulse generation
(Waveform 4) |
| A56-18 (SDNR) -A56-24 (GND1) | MGR shutdown signal
(for AWD) |
Ignition switch ON (READY) | 0 to 1 V |
| A56-19 (HMCL) - A56-24 (GND1) | Communication signal | Ignition switch ON | Pulse generation
(Waveform 5) |
| A56-20 (HMCH) - A56-24 (GND1) | Communication signal | Ignition switch ON | Pulse generation
(Waveform 5) |
| A56-22 (HSDN) - A56-24 (GND1) | MG shutdown signal | Ignition switch ON (READY) | 0 to 1 V |
| D58-1 (MSN) - D58-2 (MSNG) | Motor resolver signal | Motor resolver running | Pulse generation
(Waveform 6) |
| D58-3 (MCSG) - D58-4 (MCS) | Motor resolver signal | Motor resolver running | Pulse generation
(Waveform 6) |
| D58-5 (MRF) - D58-6 (MRFG) | Motor resolver reference signal | Motor resolver running | Pulse generation
(Waveform 6) |
| D58-8 (GRF) - D58-9 (GRFG) | Generator resolver reference signal | Generator resolver running | Pulse generation
(Waveform 7) |
| D58-10 (GSN) - D58-11 (GSNG) | Generator resolver signal | Generator resolver running | Pulse generation
(Waveform 7) |
| D58-12 (GCSG) - D58-13 (GCS) | Generator resolver signal | Generator resolver running | Pulse generation
(Waveform 7) |
Do not measure the voltage or waveform on the sealed side of the hybrid motor control inverter assembly connector. Doing so may damage the connector because the connector is waterproof.
Oscilloscope waveforms
Oscilloscope waveforms shown in the illustrations are examples for reference only. Noise, chattering, etc. are not shown.
Waveform 1 (CAN communication signal)
| Item | Content |
|---|---|
| Terminal | CH1: A56-1 (CANH) - A56-24 (GND1)
CH2: A56-7 (CANL) - A56-24 (GND1) |
| Equipment Setting | 1 V/DIV., 50 μs./DIV. |
| Condition | Ignition switch ON |
Waveform 2 (CAN communication signal)
| Item | Content |
|---|---|
| Terminal | CH1: A56-3 (CARH) - A56-24 (GND1)
CH2: A56-9 (CARL) - A56-24 (GND1) |
| Equipment Setting | 1 V/DIV., 50 μs./DIV. |
| Condition | Ignition switch ON |
Waveform 3 (camshaft position sensor signal)
| Item | Content |
|---|---|
| Terminal | A56-10 (GI) - A56-24 (GND1) |
| Equipment Setting | 5 V/DIV., 20 ms./DIV. |
| Condition | Ignition switch ON (READY), engine running |
The wavelength becomes shorter as the engine speed increases.
Waveform 4 (crankshaft position sensor signal)
| Item | Content |
|---|---|
| Terminal | A56-17 (NE) - A56-24 (GND1) |
| Equipment Setting | 5 V/DIV., 20 ms./DIV. |
| Condition | Ignition switch ON (READY), engine running |
The wavelength becomes shorter as the engine speed increases.
Waveform 5 (communication signal)
| Item | Content |
|---|---|
| Terminal | CH1: A56-19 (HMCL) - A56-24 (GND1)
CH2: A56-20 (HMCH) - A56-24 (GND1) |
| Equipment Setting | 1 V/DIV., 50 μs./DIV. |
| Condition | Ignition switch ON |
The waveform will vary depending on the content of the digital communication (digital signal).
Waveform 6 (motor resolver signal)
| Item | Content |
|---|---|
| Terminal | CH1: D58-5 (MRF) - D58-6 (MRFG)
CH2: D58-1 (MSN) - D58-2 (MSNG) CH3: D58-4 (MCS) - D58-3 (MCSG) |
| Equipment Setting | CH1: 10 V/DIV., 1 ms./DIV.
CH2: 5 V/DIV., 1 ms./DIV. CH3: 5 V/DIV., 1 ms./DIV. |
| Condition | Motor resolver running |
The width indicated by (A) becomes shorter as the rotor speed increases.
Waveform 7 (generator resolver signal)
| Item | Content |
|---|---|
| Terminal | CH1: D58-8 (GRF) - D58-9 (GRFG)
CH2: D58-10 (GSN) - D58-11 (GSNG) CH3: D58-13 (GCS) - D58-12 (GCSG) |
| Equipment Setting | CH1: 10 V/DIV., 1 ms./DIV.
CH2: 5 V/DIV., 1 ms./DIV. CH3: 5 V/DIV., 1 ms./DIV. |
| Condition | Generator resolver running |
The width indicated by (A) becomes shorter as the rotor speed increases.