Home › Drivetrain › K320 (MULTIDRIVE / CVT) › CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM
RM3700E _52 Drivetrain _092906 K320 MULTIDRIVE / CVT _0441241 CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM U

K320 MULTIDRIVE / CVT  CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM  TERMINALS OF ECU  


TCM


C390209N02
3.25,0.115 3.76,0.417 0.51,0.302 3.406,0.208 3.865,0.406 0.458,0.198 10 false D71

HINT:

The standard voltage and resistance between each pair of TCM terminals is shown in the table below.

The appropriate conditions for checking each pair of terminals are also indicated. The result of checks should be compared with the standard voltage or resistance for that pair of terminals shown in the "Specified Condition" column.

Use the illustration above as a reference for the TCM terminals.


Terminal No. (Symbol) Terminal Description Condition Specified Condition

*1: w/ Shift Paddle Switch

*2: w/o Shift Paddle Switch

D71-1 (+B) - D71-2 (E1) Power source of TCM Ignition switch ON 11 to 14 V
D71-2 (E1) - Body ground Ground Always Below 1 Ω
D71-4 (SLS+) - D71-3 (SLS-) Shift solenoid valve SLS signal Engine idling Pulse generation
D71-6 (SLU+) - D71-5 (SLU-) Shift solenoid valve SLU signal Lock-up turned from OFF to ON Pulse generation
D71-7 (NSSO) - D71-2 (E1) Transmission revolution sensor (NSS) signal Vehicle being driven with shift lever in D Pulse generation
D71-8 (NC1O) - D71-2 (E1) Transmission revolution sensor (NC1) signal Vehicle being driven in gear mode Pulse generation
D71-9 (NTO) - D71-2 (E1) Transmission revolution sensor (NT) signal Vehicle being driven with shift lever in D Pulse generation
D71-10 (NOO) - D71-2 (E1) Transmission revolution sensor (NOUT) signal Vehicle being driven with shift lever in D Pulse generation
D71-13 (NE) - D71-2 (E1) Crankshaft position sensor signal from ECM Engine idling with warm engine Pulse generation
D71-14 (B) - D71-2 (E1) M*1 or B*2 position switch signal
·

Ignition switch ON

·

Shift lever in M*1 or B*2


11 to 14 V
·

Ignition switch ON

·

Shift lever not in M*1 or B*2


Below 1 V
D71-15 (CANH) - D71-2 (E1) CAN communication line Ignition switch ON Pulse generation
D71-16 (CANL) - D71-2 (E1) CAN communication line Ignition switch ON Pulse generation
D71-17 (CAN-) - D71-2 (E1) CAN communication line to ECM Ignition switch ON Pulse generation
D71-18 (CAN+) - D71-2 (E1) CAN communication line to ECM Ignition switch ON Pulse generation
D71-19 (SL2+) - D71-20 (SL2-) Shift solenoid valve SL2 signal Vehicle being driven in belt mode Pulse generation
D71-21 (SLG+) - D71-22 (SLG-) Shift solenoid valve SLG signal
·

Vehicle being driven in gear mode

·

Shift lever in P


Pulse generation
D71-23 (NSSB) - D71-2 (E1) Power source of transmission revolution sensor (NSS) Ignition switch ON 11 to 14 V
D71-24 (NC1B) - D71-2 (E1) Power source of transmission revolution sensor (NC1) Ignition switch ON 11 to 14 V
D71-25 (NTB) - D71-2 (E1) Power source of transmission revolution sensor (NT) Ignition switch ON 11 to 14 V
D71-26 (NOB) - D71-2 (E1) Power source of transmission revolution sensor (NOUT) Ignition switch ON 11 to 14 V
D71-27 (SFTD) - D71-2 (E1) Down-shift switch signal*1
·

Ignition switch ON

·

Shift lever in M


11 to 14 V
·

Ignition switch ON

·

Shift lever held in "-"


Below 1 V
D71-28 (SFTU) - D71-2 (E1) Up-shift switch signal*1
·

Ignition switch ON

·

Shift lever in M


11 to 14 V
·

Ignition switch ON

·

Shift lever held in "+"


Below 1 V
D71-29 (P) - D71-2 (E1) P position switch signal
·

Ignition switch ON

·

Shift lever in P


11 to 14 V
·

Ignition switch ON

·

Shift lever not in P


Below 1 V
D71-30 (R) - D71-2 (E1) R position switch signal
·

Ignition switch ON

·

Shift lever in R


11 to 14 V
·

Ignition switch ON

·

Shift lever not in R


Below 1 V
D71-31 (D) - D71-2 (E1) D position switch signal
·

Ignition switch ON

·

Shift lever in D


11 to 14 V
·

Ignition switch ON

·

Shift lever not in D


Below 1 V
D71-32 (N) - D71-2 (E1) N position switch signal
·

Ignition switch ON

·

Shift lever in N


11 to 14 V
·

Ignition switch ON

·

Shift lever not in N


Below 1 V
D71-38 (SL1+) - D71-37 (SL1-) Shift solenoid valve SL1 signal Vehicle being driven in gear mode Pulse generation
D71-40 (SLP+) - D71-39 (SLP-) Shift solenoid valve SLP signal Engine idling Pulse generation
D71-41 (IGSW) - D71-2 (E1) Ignition switch signal Ignition switch ON 11 to 14 V
D71-43 (STP) - D71-2 (E1) Stop light switch assembly signal Brake pedal depressed 7.5 to 14 V
Brake pedal released Below 1.5 V
D71-45 (VCSF) - D71-44 (E2SF) Power source of shift stroke sensor Ignition switch ON 4.5 to 5.5 V
D71-46 (SFV) - D71-44 (E2SF) Shift stroke sensor signal Synchronizer engaged 1.19 to 1.29 V
Synchronizer not engaged 3.64 to 3.74 V
D71-49 (VCPT) - D71-48 (EPTO) Power source of oil pressure sensor Ignition switch ON 4.5 to 5.5 V
D71-50 (PTO) - D71-48 (EPTO) Oil pressure sensor signal Engine idling with shift lever in P 0.8 to 1.2 V
D71-51 (THO1) - D71-52 (ETHO) CVT fluid temperature sensor signal CVT fluid temperature: 60 to 120°C (140 to 248°F) 0.2 to 1.0 V


ECM


C398924N12
1.719,0.208 2.188,0.5 0.469,0.292 5.521,0.198 5.99,0.51 0.469,0.313 5.646,0.292 6.104,0.49 0.458,0.198 10 false A54 1.854,0.281 2.313,0.479 0.458,0.198 10 false D51

HINT:

The standard voltage and resistance between each pair of ECM terminals is shown in the table below.

The appropriate conditions for checking each pair of terminals are also indicated. The result of checks should be compared with the standard voltage or resistance for that pair of terminals shown in the "Specified Condition" column.

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Terminal Description Condition Specified Condition

*: w/ Shift Paddle Switch

A54-7 (CANP) - A54-10 (E1) CAN communication line to TCM Ignition switch ON Pulse generation
A54-9 (+B) - A54-10 (E1) Power source of ECM Ignition switch ON 11 to 14 V
A54-16 (NEO) - A54-10 (E1) Crankshaft position sensor signal to TCM Engine idling with warm engine Pulse generation
A54-17 (CANN) - A54-10 (E1) CAN communication line to TCM Ignition switch ON Pulse generation
A54-28 (ECCS) - A54-10 (E1) Shift paddle switch ground* Always Below 1 Ω
A54-31 (PDRV) - A54-10 (E1) Combination switch assembly (drive mode switch) signal
·

Ignition switch ON

·

Combination switch assembly (drive mode switch) being pushed


Below 1.5 V
·

Ignition switch ON

·

Combination switch assembly (drive mode switch) not being pushed


11 to 14 V
A54-35 (+B2) - A54-10 (E1) Power source of ECM Ignition switch ON 11 to 14 V