Home › Drivetrain › Q510 (HYBRID TRANSMISSION / TRANSAXLE) › HYBRID TRANSAXLE FLUID
RM3700E _52 Drivetrain _093740 Q510 HYBRID TRANSMISSION / TRANSAXLE _0441872 HYBRID TRANSAXLE FLUID G

Q510 HYBRID TRANSMISSION / TRANSAXLE  HYBRID TRANSAXLE FLUID  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT HYBRID TRANSAXLE FLUID

a.
C429456

Using a 10 mm hexagon socket wrench, remove the filler plug and gasket from the rear traction motor with transaxle assembly.


b.
C343579C01
3.063,1.719 3.302,1.906 0.24,0.188 10 false *a
*a 0 to 5 mm (0 to 0.197 in.)


Check that the hybrid transaxle fluid level is between 0 to 5 mm (0 to 0.197 in.) from the bottom lip of the filler plug opening.

NOTICE:
·

When inspecting the hybrid transaxle fluid, make sure that the vehicle is level.

·

Be sure to directly check that the hybrid transaxle fluid level is within the specified range.

·

Driving the vehicle with an insufficient or excessive amount of hybrid transaxle fluid may damage the rear traction motor with transaxle assembly.

·

If the hybrid transaxle fluid was replaced or if the hybrid transaxle fluid was added, make sure to recheck the hybrid transaxle fluid level after driving the vehicle.




c.

Check for leaks if the hybrid transaxle fluid level is low. (If there are no hybrid transaxle fluid leaks but the hybrid transaxle fluid level is low, add hybrid transaxle fluid.)

HINT:

Click hereDrivetrain>Q510 (HYBRID TRANSMISSION / TRANSAXLE)>HYBRID TRANSAXLE FLUID>ADJUSTMENT



d.

Using a 10 mm hexagon socket wrench, install a new gasket and the filler plug to the rear traction motor with transaxle assembly.

Torque:
39 N*m (398 kgf*cm, 29 ft.*lbf)


Hide 2.INSPECT FOR HYBRID TRANSAXLE FLUID LEAK

a.

Check for hybrid transaxle fluid leaks.