Home › General › SPECIFICATIONS › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › 2020.08–2021.07
RM3700E _V1 General _093022 SPECIFICATIONS _0441954 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS F

SPECIFICATIONS  BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  SERVICE DATA  


VSC OFF Switch:
Tester Connection Condition Specified Condition

Click Location & Routing(H18)Location & Routing

Click Connector(H18)Instrument Panel>Instrument Panel Wire / Speaker Wire>Combination Switch Assembly

H18-7(+) - H18-5(E) Switch pushed Below 1 Ω
H18-7(+) - H18-5(E) Switch not pushed 10 kΩ or higher
H18-4(ILL+) - H18-1(ILL-) H18-4(ILL+) - Auxiliary battery positive (+)
H18-1(ILL-) - Auxiliary battery negative (-)
The VSC OFF Switch (combination switch assembly) illumination illuminates.


Brake Hold Switch:
Tester Connection Condition Specified Condition

Click Location & Routing(H140)Location & Routing

Click Connector(H140)Instrument Panel>Instrument Panel Wire / Speaker Wire>Electric Parking Brake Switch Assembly

H140-10 (+B) - H140-12 (E) Switch pushed Below 50 Ω
H140-10 (+B) - H140-12 (E) Switch not pushed 10 kΩ or higher


Downhill Assist Control Switch:
Tester Connection Condition Specified Condition

Click Location & Routing(H133)Location & Routing

Click Connector(H133)Instrument Panel>Instrument Panel Wire / Speaker Wire>Downhill Assist Control Switch

H133-2 (E) - H133-5 (B) Switch pushed Below 1 Ω
H133-2 (E) - H133-5 (B) Switch not pushed 10 kΩ or higher
H133-6 (ILL+) - H133-1 (ILL-) H133-6 (ILL+) - Auxiliary battery positive (+)
H133-1 (ILL-) - Auxiliary battery negative (-)
The downhill assist control switch illumination illuminates.