If an hybrid vehicle control ECU that is incompatible with the immobiliser system is installed, the hybrid vehicle control ECU stores this DTC.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|
| B279C95 | Engine Immobiliser System Incorrect Assembly | An hybrid vehicle control ECU that is incompatible with immobiliser system is installed. | Hybrid vehicle control ECU | Hybrid Control | A | DTC Output Confirmation Operation:
Check for DTCs. |
| Vehicle Condition when Malfunction Detected | Fail-safe Operation when Malfunction Detected |
|---|---|
| Hybrid control system cannot be started | - |
| DTC No. | Data List and Active Test |
|---|---|
| B279C95 | - |
If the hybrid vehicle control ECU is replaced, refer to Service Bulletin.
After repair, confirm that no DTCs are output by performing "DTC Output Confirmation Operation".
Replace the hybrid vehicle control ECU.
| Proceed to |
|---|
| NEXT |
NEXT