22030
1.INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY
| *a | Component without harness connected
(Throttle Body with Motor Assembly) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
Click Location & Routing(D18)Location & Routingewd_type=routing;type=c;code=D18 Click Connector(D18)Engine Compartment>Engine Wire>Throttle Body with Throttle Position Sensor Assemblyewd_type=component;type=c;code=D18;pinno=5,6 |
||
| D18-5 (M-) - D18-6 (M+) | 20°C (68°F) | 0.3 to 100 Ω |
If the result is not as specified, replace the throttle body with motor assembly.