| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | SPARK PLUG | 19100P | - | - | - |
| 2 | IGNITION COIL ASSEMBLY | 19500 | - | - | - |
| 3 | PERFORM INITIALIZATION | - | - | - | - |
|
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
19500
2.INSTALL IGNITION COIL ASSEMBLY
Using an 8 mm socket wrench, install the 3 ignition coil assemblies to the cylinder head cover sub-assembly with the 3 bolts.
If an ignition coil assembly has been struck or dropped, replace it.
Connect the 3 ignition coil assembly connectors.
3.PERFORM INITIALIZATION
Perform "Inspection After Repair" after replacing an ignition coil assembly or spark plug.
Click hereEngine / Hybrid System>M15A-FKS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION