Home › Engine / Hybrid System › M15A-FKS (ENGINE CONTROL) › ENGINE COOLANT TEMPERATURE SENSOR
RM3700E _51 Engine / Hybrid System _093766 M15A-FKS ENGINE CONTROL _0442026 ENGINE COOLANT TEMPERATURE SENSOR G

M15A-FKS ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 89422A 1.INSPECT ENGINE COOLANT TEMPERATURE SENSOR

CAUTION:
A342307

·

Do not put your hands into the water that has been heated for the inspection.

·

Touching the heated water could result in burns.



a.
A402373C06
1.51,0.042 1.906,0.25 0.396,0.208 1.052,0.083 1.292,0.313 0.24,0.229 10 false *a 1.583,0.063 1.885,0.292 0.302,0.229 10 false D35
*a Component without harness connected
(Engine Coolant Temperature Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(D35)Location & Routing

Click Connector(D35)Engine Compartment>Engine Wire>Engine Coolant Temperature Sensor

D35-1 - D35-2 20°C (68°F) 2.32 to 2.59 kΩ
D35-1 - D35-2 80°C (176°F) 0.310 to 0.326 kΩ


NOTICE:

If checking the engine coolant temperature sensor in water, be careful not to allow water to contact the terminals. After checking, wipe the water off the engine coolant temperature sensor.


If the result is not as specified, replace the engine coolant temperature sensor.