Home › Engine / Hybrid System › M15A-FXE (ENGINE CONTROL) › CAMSHAFT OIL CONTROL SOLENOID
RM3700E _51 Engine / Hybrid System _093768 M15A-FXE ENGINE CONTROL _0442033 CAMSHAFT OIL CONTROL SOLENOID A

M15A-FXE ENGINE CONTROL  CAMSHAFT OIL CONTROL SOLENOID  REMOVAL  


CAUTION / NOTICE / HINT

COMPONENTS (REMOVAL)
A459221N01
1.771,2.917 2.104,2.917 false 3.094,2.531 3.094,2.875 false 2.563,2.604 2.729,2.604 false 1.552,2.792 1.833,3.146 0.281,0.354 18 false 1 3.156,2.885 3.438,3.24 0.281,0.354 18 false 2 2.833,2.583 3.104,2.781 0.271,0.198 10 false x2 1.656,4.458 1.927,4.656 0.271,0.198 10 false x2 2.271,2.531 2.625,2.729 0.354,0.198 10 false ●★

Procedure Part Name Code
Z101186

Z101188

Z101187

1 ENGINE WIRE - - - -
2 CAM TIMING OIL CONTROL SOLENOID ASSEMBLY 15370 - - -

● Non-reusable part ★ Precoated part

CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 1.REMOVE ENGINE WIRE

a.
A458743


Hide 15370 2.REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY

a.
A458745N01
1.01,0.167 1.427,0.469 0.417,0.302 18 false iii 4.552,0.156 4.969,0.458 0.417,0.302 18 true i, ii

i.

Disconnect the cam timing oil control solenoid assembly connector.


ii.

Using an 8 mm socket wrench, remove the 2 bolts and cam timing oil control solenoid assembly from the No. 2 timing chain cover assembly.

NOTICE:

If the cam timing oil control solenoid assembly has been struck or dropped, replace it.



iii.

Remove the O-ring from the cam timing oil control solenoid assembly.

NOTICE:
·

When removing the O-ring, be careful not to damage the O-ring groove of the cam timing oil control solenoid assembly.

·

If the cam timing oil control solenoid O-ring groove of the cam timing oil control solenoid assembly is damaged, replace the cam timing oil control solenoid assembly with a new one.



HINT:

Perform this procedure only when replacement of the O-ring is necessary.