89467B
1.INSPECT AIR FUEL RATIO SENSOR
| *a | Component without harness connected
(Air Fuel Ratio Sensor) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
Click Location & Routing(D40)Location & Routingewd_type=routing;type=c;code=D40 Click Connector(D40)Engine Compartment>Engine Wire>Air Fuel Ratio Sensorewd_type=component;type=c;code=D40;pinno=4,5,1,3 |
||
| D40-4 (HA1A) - D40-5 (+B) | 20°C (68°F) | 2.5 to 3.0 Ω |
| D40-1 (IP+) - D40-3 (VS+) | Always | 1 MΩ or higher |
If the result is not as specified, replace the air fuel ratio sensor.