Home › Engine / Hybrid System › M15A-FXE (ENGINE CONTROL) › RELAY
RM3700E _51 Engine / Hybrid System _093768 M15A-FXE ENGINE CONTROL _0442045 RELAY G

M15A-FXE ENGINE CONTROL  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85912K 1.INSPECT VVT RELAY (VVT)

a.
A188757N05
1.906,0.302 2.094,0.302 2.094,0.302 2.146,0.563 false 3.031,0.302 2.813,0.302 2.813,0.302 2.708,0.563 false 2.646,1.115 3.104,1.115 false 2.646,1.604 3.104,1.604 false 0.365,0.771 0.521,0.969 0.156,0.198 10 3 1.813,0.24 1.969,0.406 0.156,0.167 10 1 1.302,1.292 1.458,1.49 0.156,0.198 10 2 0.354,1.302 0.51,1.469 0.156,0.167 10 1 3.094,0.24 3.25,0.438 0.156,0.198 10 2 1.302,0.76 1.458,0.958 0.156,0.198 10 5 3.177,1.031 3.333,1.229 0.156,0.198 10 5 3.177,1.521 3.333,1.719 0.156,0.198 10 3

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
3 - 5 Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the VVT relay (VVT).


Hide 85917D 2.INSPECT AIR FUEL RATIO SENSOR HEATER RELAY (A/F HTR)

a.
A188757N05
1.906,0.302 2.094,0.302 2.094,0.302 2.146,0.563 false 3.031,0.302 2.813,0.302 2.813,0.302 2.708,0.563 false 2.646,1.115 3.104,1.115 false 2.646,1.604 3.104,1.604 false 0.365,0.771 0.521,0.969 0.156,0.198 10 3 1.813,0.24 1.969,0.406 0.156,0.167 10 1 1.302,1.292 1.458,1.49 0.156,0.198 10 2 0.354,1.302 0.51,1.469 0.156,0.167 10 1 3.094,0.24 3.25,0.438 0.156,0.198 10 2 1.302,0.76 1.458,0.958 0.156,0.198 10 5 3.177,1.031 3.333,1.229 0.156,0.198 10 5 3.177,1.521 3.333,1.719 0.156,0.198 10 3

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
3 - 5 Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the air fuel ratio sensor heater relay (A/F HTR).


Hide 89561F 3.INSPECT NO. 1 ELECTRONIC FUEL INJECTION MAIN RELAY (EFI-MAIN NO. 1)

a.
A188757N05
1.906,0.302 2.094,0.302 2.094,0.302 2.146,0.563 false 3.031,0.302 2.813,0.302 2.813,0.302 2.708,0.563 false 2.646,1.115 3.104,1.115 false 2.646,1.604 3.104,1.604 false 0.365,0.771 0.521,0.969 0.156,0.198 10 3 1.813,0.24 1.969,0.406 0.156,0.167 10 1 1.302,1.292 1.458,1.49 0.156,0.198 10 2 0.354,1.302 0.51,1.469 0.156,0.167 10 1 3.094,0.24 3.25,0.438 0.156,0.198 10 2 1.302,0.76 1.458,0.958 0.156,0.198 10 5 3.177,1.031 3.333,1.229 0.156,0.198 10 5 3.177,1.521 3.333,1.719 0.156,0.198 10 3

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
3 - 5 Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the No. 1 electronic fuel injection main relay (EFI-MAIN NO. 1).


Hide 89561G 4.INSPECT NO. 2 ELECTRONIC FUEL INJECTION MAIN RELAY (EFI-MAIN NO. 2)

a.
A273391N01
2.667,0.74 2.927,0.74 true 2.531,1.125 2.948,1.125 true 2.531,1.625 2.948,1.625 true 1.708,0.74 1.969,0.74 true 0.229,1.313 0.385,1.51 0.156,0.198 10 1 1.188,1.313 1.344,1.51 0.156,0.198 10 2 0.219,0.781 0.375,0.979 0.156,0.198 10 3 1.188,0.771 1.344,0.969 0.156,0.198 10 5 3,1.052 3.156,1.25 0.156,0.198 10 5 1.604,0.667 1.76,0.865 0.156,0.198 10 1 2.99,0.667 3.146,0.865 0.156,0.198 10 2 3,1.552 3.156,1.75 0.156,0.198 10 3

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
3 - 5 Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the No. 2 electronic fuel injection main relay (EFI-MAIN NO. 2).


Hide 89561H 5.INSPECT NO. 3 ELECTRONIC FUEL INJECTION MAIN RELAY (EFI-MAIN NO. 3)

a.
A188757N05
1.906,0.302 2.094,0.302 2.094,0.302 2.146,0.563 false 3.031,0.302 2.813,0.302 2.813,0.302 2.708,0.563 false 2.646,1.115 3.104,1.115 false 2.646,1.604 3.104,1.604 false 0.365,0.771 0.521,0.969 0.156,0.198 10 3 1.813,0.24 1.969,0.406 0.156,0.167 10 1 1.302,1.292 1.458,1.49 0.156,0.198 10 2 0.354,1.302 0.51,1.469 0.156,0.167 10 1 3.094,0.24 3.25,0.438 0.156,0.198 10 2 1.302,0.76 1.458,0.958 0.156,0.198 10 5 3.177,1.031 3.333,1.229 0.156,0.198 10 5 3.177,1.521 3.333,1.719 0.156,0.198 10 3

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
3 - 5 Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the No. 3 electronic fuel injection main relay (EFI-MAIN NO. 3).


Hide 85910E 6.INSPECT INJECTOR RELAY (IGP)

a.
A188757N05
1.906,0.302 2.094,0.302 2.094,0.302 2.146,0.563 false 3.031,0.302 2.813,0.302 2.813,0.302 2.708,0.563 false 2.646,1.115 3.104,1.115 false 2.646,1.604 3.104,1.604 false 0.365,0.771 0.521,0.969 0.156,0.198 10 3 1.813,0.24 1.969,0.406 0.156,0.167 10 1 1.302,1.292 1.458,1.49 0.156,0.198 10 2 0.354,1.302 0.51,1.469 0.156,0.167 10 1 3.094,0.24 3.25,0.438 0.156,0.198 10 2 1.302,0.76 1.458,0.958 0.156,0.198 10 5 3.177,1.031 3.333,1.229 0.156,0.198 10 5 3.177,1.521 3.333,1.719 0.156,0.198 10 3

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
3 - 5 Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the injector relay (IGP).