47070
1.INSPECT BRAKE BOOSTER PUMP ASSEMBLY
| *a | Component without harness connected
(Brake Booster Pump Assembly) |
Check the resistance.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
Click Location & Routing(A30)Location & Routingewd_type=routing;type=c;code=A30 Click Connector(A30)Engine Compartment>Engine Room Main Wire>Brake Booster Pump Assemblyewd_type=component;type=c;code=A30;pinno=2,4,1,3 |
||
| A30-2(BM1) - A30-4(GND1) | Always | Below 10 Ω |
| A30-1(BM2) - A30-3(GND2) | Always | Below 10 Ω |
| A30-2(BM1) - A30-1(BM2) | Always | Below 1 Ω |
| A30-4(GND1) - A30-3(GND2) | Always | Below 1 Ω |