89491
1.INSPECT ENGINE OIL LEVEL SENSOR
| *a | Component without harness connected
(Engine Oil Level Sensor) |
| *b | Engine Oil Level Sensor Body |
| *c | ON |
| *d | OFF |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
Click Location & Routing(D31)Location & Routingewd_type=routing;type=c;code=D31 Click Connector(D31)Engine Compartment>Engine Wire>Engine Oil Level Sensorewd_type=component;type=c;code=D31;pinno=1 |
||
| D31-1 - Body ground | ON | Below 1 Ω |
| D31-1 - Body ground | OFF | 10 kΩ or higher |
If the result is not as specified, replace the engine oil level sensor.