POWER STEERING ECU INITIAL SETTING (ASSIST MAP WRITING) (USING GTS)
If any of the following conditions are met, perform Power Steering ECU Initial Setting (assist map writing):
The power steering ECU assembly has been replaced.
The electric power steering column sub-assembly has been replaced.
Perform Power Steering ECU Initial Setting (assist map writing).
Align the front wheels straight ahead and center the steering wheel.
Enter the following menus: Chassis / EMPS / Utility / Power Steering ECU Initial Setting.
| Tester Display |
|---|
| Power Steering ECU Initial Setting |
Do not turn the steering wheel sharply.
Check for RoBs.
| Tester Display |
|---|
| Vehicle Control History (RoB) |
When Power Steering ECU Initial Setting (assist map writing) are completed, make sure to check for vehicle control history (RoB).