Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION ANTENNA (for Instrument Panel) › 2020.08–2021.07
RM3700E _56 Audio / Visual / Telematics _093687 NAVIGATION / MULTI INFO DISPLAY _0442565 NAVIGATION ANTENNA(for Instrument Panel) G

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION ANTENNA(for Instrument Panel)  INSPECTION  


PROCEDURE

Hide 86860 1.INSPECT NAVIGATION ANTENNA ASSEMBLY

a.

Check that the navigation antenna assembly cable is properly installed and does not have any sharp bends, pinching or loose connections.


b.

Current consumption check: (GPS)

i.
E458228C03
1.615,1.25 2.271,0.698 true 1.552,1.302 1.906,1.844 true 0.104,0.104 0.375,0.323 0.271,0.219 10 false *a 1.667,2.885 1.875,3.063 0.208,0.177 10 false *b 2.313,0.604 2.583,0.823 0.271,0.219 10 false 3a 1.896,1.844 2.167,2.063 0.271,0.219 10 false 3
*a Component without harness connected
(Navigation Antenna Assembly)
*b Voltage Applied between Terminals


Measure the current consumption according to the value(s) in the table below.

Standard Current:
Tester Connection Condition Specified Condition
3 (core) - 3a (shield) 4.2 to 5 V applied between terminals 3 and 3a 10 to 30 mA


NOTICE:

Do not apply 6 V or more between terminals 3 and 3a.


HINT:

If a stable power supply is not available, connect 4 nickel-metal hydride batteries (1.2 V each) or equivalent in series.




c.

Resistance check: (Telephone Sub)

i.
E432252C02
1.125,1.177 0.438,0.729 true 1.198,1.229 1.198,1.823 true 1.167,1.823 1.354,1.979 0.188,0.156 10 false 4 0.031,0.031 0.344,0.229 0.313,0.198 10 false *a 0.26,0.635 0.479,0.833 0.219,0.198 10 false 4a
*a Component without harness connected
(Navigation Antenna Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
4 (core) - 4a (shield) Always 9 to 11 kΩ