Home › Audio / Visual / Telematics › AUDIO / VIDEO › FRONT DOOR SPEAKER › 2020.08–2021.07
RM3700E _56 Audio / Visual / Telematics _093686 AUDIO / VIDEO _0442489 FRONT DOOR SPEAKER G

AUDIO / VIDEO  FRONT DOOR SPEAKER  INSPECTION  


PROCEDURE

Hide 86160 1.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY (for RH Side)

a.

Check the visually.

i.

With the speaker installed, check that there is no looseness or other abnormalities.


ii.

Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.


iii.

If the result is not as specified, replace the front No. 1 speaker assembly.



b.

Check the resistance.

i.
E364209C29
1.552,0.438 1.958,0.677 0.406,0.24 1.25,1.604 1.563,1.313 true 1.99,1.615 1.875,1.292 true 0.073,0.063 0.344,0.292 0.271,0.229 12 false *a 1.177,1.615 1.344,1.76 0.167,0.146 10 false + 2.031,1.594 2.198,1.74 0.167,0.146 10 false - 1.688,0.479 2,0.677 0.313,0.198 10 false K2
*a Component without harness connected
(Front No. 1 Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(K2)Location & Routing

Click Connector(K2)Body>Front Door Wire RH / Television Camera Wire>Front No. 1 Speaker Assembly RH

K2-2(+) - K2-1(-) Always 4.0 Ω



ii.

If the result is not as specified, replace the front No. 1 speaker assembly.



Hide 86160 2.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY (for LH Side)

a.

Check the visually.

i.

With the speaker installed, check that there is no looseness or other abnormalities.


ii.

Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.


iii.

If the result is not as specified, replace the front No. 1 speaker assembly.



b.

Check the resistance.

i.
E364209C30
1.552,0.438 1.958,0.677 0.406,0.24 1.25,1.604 1.563,1.313 true 1.99,1.615 1.875,1.292 true 0.073,0.063 0.344,0.292 0.271,0.229 12 false *a 1.177,1.615 1.344,1.76 0.167,0.146 10 false + 2.031,1.594 2.198,1.74 0.167,0.146 10 false - 1.688,0.479 2,0.677 0.313,0.198 10 false L2
*a Component without harness connected
(Front No. 1 Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(L2)Location & Routing

Click Connector(L2)Body>Front Door Wire LH / Television Camera Wire>Front No. 1 Speaker Assembly LH

L2-2(+) - L2-1(-) Always 4.0 Ω



ii.

If the result is not as specified, replace the front No. 1 speaker assembly.