Home › Audio / Visual / Telematics › AUDIO / VIDEO › PILLAR SPEAKER
RM3700E _56 Audio / Visual / Telematics _093686 AUDIO / VIDEO _0442491 PILLAR SPEAKER G

AUDIO / VIDEO  PILLAR SPEAKER  INSPECTION  


PROCEDURE

Hide 86160P 1.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY (for RH Side)

a.

Check the visually.

i.

Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.


ii.

If the result is not as specified, replace the front No. 2 speaker assembly.



b.

Check the resistance.

i.
E404842C09
1.542,0.958 2.01,1.219 0.469,0.26 2.25,1.792 2.917,2.458 true 1.958,1.802 1.958,2.583 true 1.365,1.792 0.802,2.49 true 1.646,1.802 1.385,2.479 true 0.083,0.052 0.396,0.302 0.313,0.25 10 false *a 1.833,2.594 2.354,2.885 0.521,0.292 10 false TWR- 0.594,2.49 1.052,2.729 0.458,0.24 10 false TWR+ 1.323,2.479 1.615,2.719 0.292,0.24 10 false + 2.917,2.458 3.219,2.75 0.302,0.292 10 false - 1.635,1.01 2.25,1.208 0.615,0.198 10 false H88
*a Component without harness connected
(Front No. 2 Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(H88)Location & Routing

Click Connector(H88)Instrument Panel>Instrument Panel Wire / Speaker Wire>Front No. 2 Speaker Assembly RH

H88-4(TWR+) - H88-2(TWR-) Always 4 Ω
H88-1(-) - H88-2(TWR-) Always Below 1 Ω
H88-3(+) - H88-4(TWR+) Always Below 1 Ω



ii.

If the result is not as specified, replace the front No. 2 speaker assembly.



Hide 86160P 2.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY (for LH Side)

a.

Check the visually.

i.

Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.


ii.

If the result is not as specified, replace the front No. 2 speaker assembly.



b.

Check the resistance.

i.
E404842C06
1.542,0.958 2.01,1.219 0.469,0.26 2.25,1.792 2.917,2.458 true 1.958,1.802 1.958,2.583 true 1.365,1.792 0.802,2.49 true 1.646,1.802 1.385,2.479 true 0.083,0.052 0.396,0.302 0.313,0.25 10 false *a 1.833,2.594 2.354,2.885 0.521,0.292 10 false TWL- 0.594,2.49 1.052,2.729 0.458,0.24 10 false TWL+ 1.323,2.479 1.615,2.719 0.292,0.24 10 false + 2.917,2.458 3.219,2.75 0.302,0.292 10 false - 1.667,1.01 2.281,1.208 0.615,0.198 10 false H87
*a Component without harness connected
(Front No. 2 Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(H87)Location & Routing

Click Connector(H87)Instrument Panel>Instrument Panel Wire / Speaker Wire>Front No. 2 Speaker Assembly LH

H87-4(TWL+) - H87-2(TWL-) Always 4 Ω
H87-1(-) - H87-2(TWL-) Always Below 1 Ω
H87-3(+) - H87-4(TWL+) Always Below 1 Ω



ii.

If the result is not as specified, replace the front No. 2 speaker assembly.